Cisco UC 320W Administration Manual page 34

Small business unified communications

Table of Contents

Installing the UC 320W and Phones

Connecting Attendant Consoles

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

CAUTION

Unified Communications UC 320W Administration Guide

Place the IP phone and Cisco SPA 500S face down on a flat surface, with Cisco

SPA 500S on the left.

Align the attachment arm over the peg holes on the right side of the phone and the

left side of Cisco SPA 500S. Insert the attachment arm pegs into the peg holes.

Using the attachment arm screws, secure the attachment arm to the phone and

Cisco SPA 500S.

Locate the AUX IN port on the back of Cisco SPA 500S. Connect one end of the

auxiliary cable to this port.

Locate the AUX port on the back of the IP phone. Connect the other end of the

auxiliary cable to this port. Cisco SPA 500S is powered by the auxiliary cable with

the IP phone; no additional power source is required.

Do not plug a telephone line cord into the AUX port. Use

provided with Cisco SPA 500S.

only the auxiliary cable

Table of Contents