Cisco Aironet CB21AG Installation And Configuration Manual page 159
Cisco aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for Aironet CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Chapter 7
Viewing Status and Statistics
Table 7-4
Status
Associated AP Name
Associated AP IP Address
Associated AP MAC Address The MAC address of the access point to which your client adapter is
Power Save Mode
Current Power Level
Available Power Levels
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Advanced Client Adapter Status (continued)
Description
The name of the access point to which your client adapter is associated.
It is shown only if the client adapter is in infrastructure mode, the
access point was configured with a name, and Aironet Extensions are
enabled (on access points running Cisco IOS Release 12.2(4)JA or
later).
Note
This field shows up to 15 characters although the name of the
access point may be longer.
The IP address of the access point to which your client adapter is
associated. It is shown only if the client adapter is in infrastructure
mode, the access point was configured with an IP address, and Aironet
Extensions are enabled (on access points running Cisco IOS Release
12.2(4)JA or later).
If Aironet Extensions are disabled, the IP address of the
Note
associated access point is shown as 0.0.0.0.
associated. It is shown only if the client adapter is in infrastructure
mode.
This field displays the MAC address of the access point's
Note
Ethernet port (for access points that do not run Cisco IOS
software) or the MAC address of the access point's radio (for
access points that run Cisco IOS software). The MAC address
of the Ethernet port on access points that run Cisco IOS
software is printed on a label on the back of the device.
The client adapter's current power consumption setting.
Value: CAM (Constantly Awake Mode), Max PSP (Max Power
Saving), or Fast PSP (Power Save Mode)
Refer to the Power Save Mode parameter in
Note
information on setting the client adapter's power save mode.
The power level at which your client adapter is currently transmitting.
The maximum level is dependent upon the radio band used and your
country's regulatory agency.
Value: 10, 13, 20, 25, or 40 mW (802.11a band);
10, 20, 32, 50, 63, or 100 mW (802.11b/g band)
Note
Refer to the Transmit Power Level parameter in
information on setting the client adapter's power level.
The power levels at which your client adapter is capable of
transmitting. The maximum level is dependent upon the radio band
used and your country's regulatory agency.
Value: 10, 13, 20, 25, or 40 mW (802.11a band);
10, 20, 32, 50, 63, or 100 mW (802.11b/g band)
Refer to the Transmit Power Level parameter in
Note
information on the client adapter's available power levels.
Viewing the Current Status of Your Client Adapter
Table 5-3
for
Table 5-3
for
Table 5-3
for
7-9
Advertisement
Table of Contents
