Table of Contents
Advertisement
Installing the Supervisor in the Cisco cBR Chassis
• RJ-45 cable
• Switch
Step 1
Connect one end of the RJ-45 cable to the NME port on the Supervisor PIC.
Figure 39: NME Port Connection on the Supervisor PIC
Step 2
Connect the other end of the RJ-45 cable to a switch.
What to Do Next
Route the RJ-45 cable through the Supervisor PIC cable management bracket and chassis-mounted fiber/cable
routing
Using the Console Port on the Supervisor PIC
The console port provides local administrative access to the router and its command-line interface (CLI).
Before You Begin
•
•
Restrictions
• Each Supervisor PIC must have a console port connection when running a redundant configuration in
Required Tools and Equipment
• RJ-45 cable
• RJ-45-to-DB-9 adapter
guide.
Install the Supervisor
PIC.
Install the Supervisor
Card.
the chassis.
Using the Console Port on the Supervisor PIC
Cisco Converged Broadband Routers Hardware Installation Guide
51
Advertisement
Table of Contents
