Vehicle Mode; Memory Partition - Pioneer XM2GO User Manual
Portable satellite radio with mp3
Hide thumbs
Also See for XM2GO:
- User manual (103 pages) ,
- Install manual (16 pages) ,
- Install manual (2 pages)
Table of Contents
Advertisement
Settings
Vehicle Mode
If you listen to your inno in a vehicle, you've probably plugged the power adapter into the
cigarette lighter socket. In some vehicles, the cigarette lighter is turned on or off with the
ignition key; in other vehicles, the cigarette lighter is powered all the time. To prevent your
battery from being drained, choose one of the following settings:
1. Select XM ➝ Settings ➝ Setup ➝ Set Time ➝ Vehicle Mode.
2. Choose one of the following settings:
OFF
Auto ON/OFF
ON
Delayed Power Off
OFF or
60-180 minutes
3. The setting is saved even if you turn inno off. The vehicle mode setting is only active when
you use the car dock.
76
Settings
Choose this option if the cigarette lighter
is always powered. You must turn inno
on or off using its own power switch.
Choose this option if the ignition key
switches the cigarette lighter on and off.
Another option if the cigarette lighter is
always powered: inno automatically turns
off 60 to 180 minutes after you turn it on.
Memory Partition
The internal storage in inno can store recorded XM content and MP3/WMA files. By default,
the storage is divided 50/50, but you can select different memory partitions:
typical storage for content
setting
recorded from XM
50/50 XM/PC files
25 hours
100% XM
50 hours
To change the memory partition:
1. Place your inno into the home dock and connect the AC power adapter.
2. Select XM ➝ Settings ➝ Setup ➝ Memory Partition.
3. Highlight the desired setting and press the XM button.
4. Confirm by selecting Yes, or cancel by selecting No.
CAUTION:
When you change the memory partition, you will erase all your stored XM content
and MP3/WMA tracks from your inno.
Settings
typical storage for PC
(MP3 and WMA) tracks
8 hours
0 hours
77
Settings
Hide quick links:
Advertisement
Table of Contents
