Table of Contents
Advertisement
Useful Remote Control Features
13
1
2
3
4
5
100
En
CBL/SAT control buttons
When the CBL/SAT function has been preset by the remote
control's learning function, the remote control buttons
function as shown below.
• When the Mode switch is set to CBL/SAT, the cable
converter or satellite broadcast tuner connected to the
display, use the buttons shown below to operate the device
(3, 4, 5, 8 and 9 for cable converters and 1 to 7 for satellite
6
tuners):
• Cable converters or satellite broadcast tuners made by other
manufacturers not listed in the system can be controlled
using the remote control if buttons 1 to 9 have already
learned the functions. See page 92.
7
1
2
8
3
9
4
5
6
Mode switch
(with "CBL/SAT"
selected)
7
8
9
*
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device's remote
control.
SAT MENU
Displays the satellite broadcasting menu screen
ENTER,
/ / /
ENTER:
Activates the selected function
: Selects items on the SAT GUIDE screen or
/ / /
SAT MENU screen
0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch
CH +/–
Selects a higher or lower channel
SOURCE
Turns the device sending the image On and Off
SAT GUIDE
Displays the satellite broadcasting guide screen
• Set up this button with the learning function if necessary
RETURN
When the CBL/SAT menu is displayed, restores the
immediately previous screen
CH ENTER*
Enters the selected channel with the direct channel
selection buttons
CH RETURN*
Switches between the current channel and the previous
channel you were watching
Some cable converter manufacturers do not preset CH
ENTER and CH RETURN. Set up these buttons with the
learning function if necessary.
NOTE
- Quick Links:
- Remote Control Unit
- Troubleshooting
Hide quick links:
Advertisement
Chapters
Table of Contents
