hit counter script
Yamaha XP530E-A Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. XP530E-A
  6. Owner's manual

Yamaha XP530E-A Owner's Manual

Tmax abs
Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
TMAX ABS
MOTORCYCLE
Read this manual carefully before oper-
ating this vehicle.
XP530E-A
XP530-A
XP530D-A
BV1-28199-E0

Advertisement

Table of Contents
loading

Related Manuals for Yamaha XP530E-A

Summary of Contents for Yamaha XP530E-A

  • Page 1 OWNER’S MANUAL TMAX ABS MOTORCYCLE Read this manual carefully before oper- ating this vehicle. XP530E-A XP530-A XP530D-A BV1-28199-E0...
  • Page 2 EAU77940 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
  • Page 3 EAU79571 For XP530-A and XP530D-A...
  • Page 5 If you have any further questions, do not hesitate to con- tact your Yamaha dealer. The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first! Yamaha continually seeks advancements in product design and quality. There-...

  • Page 6: Important Manual Information

    *Product and specifications are subject to change without notice. EAU10201 XP530E-A/XP530-A/XP530D-A OWNER’S MANUAL ©2016 by Yamaha Motor Co., Ltd. 1st edition, October 2016 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd.

  • Page 7: Table Of Contents

    Table of contents Safety information ......1-1 Windshield Further safe-riding points ....1-5 (XP530E-A, XP530-A) ....5-25 Rear view mirrors......5-26 Description ........2-1 Shock absorber assembly..... 5-27 Left view .......... 2-1 Auxiliary DC jack......5-28 Right view........2-2 Sidestand ........5-29 Controls and instruments ....
  • Page 8 Table of contents Checking the rear brake lock..8-22 Checking the front and rear brake pads ...........8-22 Checking the brake fluid level..8-23 Changing the brake fluid....8-24 Drive belt slack ......8-24 Checking and lubricating the cables.........8-25 Checking and lubricating the throttle grip and cable....8-25 Lubricating the front and rear brake levers........8-26 Checking and lubricating the...

  • Page 9: Safety Information

    Safety information EAU1026B for a list of pre-operation checks.  This scooter is designed to carry the operator and a passenger. Be a Responsible Owner  The failure of motorists to detect As the vehicle’s owner, you are respon- and recognize scooters in traffic is sible for the safe and proper operation the predominating cause of auto- of your scooter.
  • Page 10 Safety information Protective Apparel help you to avoid an accident. • We recommend that you prac- The majority of fatalities from scooter tice riding your scooter where accidents are the result of head inju- there is no traffic until you have ries.
  • Page 11 The total weight of the operator, pas- senger, accessories and cargo must Yamaha accessories, which are avail- not exceed the maximum load limit. able only from a Yamaha dealer, have Operation of an overloaded vehicle been designed, tested, and approved could cause an accident.
  • Page 12 Yamaha or should be kept to a minimum. • Bulky or large accessories may modifications not specifically recom- mended by Yamaha, even if sold and seriously affect the stability of installed by a Yamaha dealer. the scooter due to aerodynamic effects.

  • Page 13: Further Safe-Riding Points

    Safety information Transporting the Scooter EAU57600 Further safe-riding points Be sure to observe following instruc-  Be sure to signal clearly when tions before transporting the scooter in making turns. another vehicle.  Braking can be extremely difficult  Remove all loose items from the on a wet road.

  • Page 14: Description

    Description EAU63371 Left view 1. Battery (page 8-28) 2. Fuel tank cap (page 5-20) 3. Rear storage compartment (page 5-23) 4. Engine oil filler cap (page 8-10) 5. Grab bar (page 7-3) 6. Sidestand (page 5-29) 7. Engine oil drain bolt (page 8-10) 8.

  • Page 15: Right View

    Description EAU63391 Right view 1. Owner’s tool kit (page 8-2) 2. Air filter element (page 8-15) 3. Windshield (page 5-25/5-7) 4. Fuses (page 8-30) 5. Centerstand (page 8-26)

  • Page 16: Controls And Instruments

    Description EAU63401 Controls and instruments 10, 11 1. Rear brake lever (page 5-18) 2. Left handlebar switches (page 5-1) 3. Rear brake lock lever (page 5-18) 4. Speedometer (page 5-4) 5. Multi-function display (page 5-5) 6. Tachometer (page 5-4) 7. Right handlebar switches (page 5-1) 8.

  • Page 17: Smart Key System

    Smart key system EAU77201 Smart key system The smart key system enables the ve- hicle to be operated without using a mechanical key. EWA14704 WARNING Keep implanted pacemakers or  cardiac defibrillators, as well as other electric medical devices away from the vehicle mounted 1.

  • Page 18: Operating Range Of The Smart Key

    Smart key system EAU77212 Operating range of the smart key system The operating range of the smart key system is about 80 cm (31.5 in) from the center of the handlebars. 1. “ / ” switch 2. “OFF/LOCK” switch ECA15764 NOTICE The smart key system uses weak ra- dio waves.

  • Page 19: Handling Of The Smart Key And Mechanical Key

    Smart key system municate with the vehicle, all EAU61646 Handling of the smart key and switches will be temporarily dis- mechanical key abled. Included with the vehicle is one smart  Placing the smart key in the front key (with a built-in mechanical key) and or rear storage compartment may one spare mechanical key with an iden- block communication between the...
  • Page 20 Do not leave the smart key in a  system still does not operate, have a place exposed to direct sun- Yamaha dealer check the vehicle. light, high temperature or high humidity. Do not grind or attempt to mod- ...

  • Page 21: Smart Key

    Smart key system EAU77223 to turn on the vehicle power. Smart key To use the mechanical key Pull out the mechanical key from the smart key body. After using the me- chanical key, insert it back into the smart key. 1.

  • Page 22: Replacing The Smart Key Battery

    Smart key system waterproof seal from being EAU79070 Replacing the smart key damaged or contaminated by battery dirt. Do not touch the internal cir- Replace the battery in the following sit-  cuits and terminals. This may uations.  cause malfunctions. The smart key system indicator Make sure the battery is in- light flashes for about 20 seconds...

  • Page 23: Powering On The Vehicle

    Smart key system 4. Install a new battery as shown. EAU77232 Powering on the vehicle Note the polarity of the battery. 1. With the smart key on and in oper- Specified battery: ating range, briefly press the CR2025 “ON/ ” switch. 1.

  • Page 24: Powering Off The Vehicle

    If the steering lock or centerstand lock will not release and the smart 1. “OFF/LOCK” switch key system indicator light is flash- ing, have a Yamaha dealer check the Upon authentification of the smart key, smart key system. the beeper will sound once to confirm that the vehicle power has been suc- 3.

  • Page 25: How To Lock The Steering

    Smart key system ering off the vehicle again. EAU80000 How to lock the steering After moving the vehicle to a safe park- Without the smart key, the vehicle pow- ing place, turn off the power of the vehi- er can be turned off by pressing the cle.

  • Page 26: How To Lock The Centerstand

    Smart key system EAU78052 EAU77243 How to lock the centerstand Storage compartment and fuel tank access Park the vehicle on a firm level surface and then place it on the centerstand. To open the seat Press the “OFF/LOCK” switch for one second.
  • Page 27 Smart key system 1. Fuel tank cap lid To close the seat To close the fuel tank cap lid Fold the seat down, and then push it to lock it in place. Push the lid to the original position. To open the front storage comapart- ...

  • Page 28: Parking Mode

    Smart key system EAU77251 Parking mode The steering is locked, and the hazard lights and turn signal lights can be turned on, but all other electrical sys- tems are off. To enter parking mode 1. Lock the steering. (See page 3-9.） 2.

  • Page 29: Special Features

    Special features EAU77263 Cruise control system (XP530D-A) The cruise control system is designed to maintain a set cruising speed be- tween about 50 km/h (31 mi/h) and 140 km/h (87 mi/h). EWA16341 WARNING Improper use of the cruise con-  1.
  • Page 30 Special features traveling speed using the throttle. After light will come on. you have accelerated, you can set a EWA16351 WARNING new cruising speed by pushing the It is dangerous to use the resume “SET–” side of the setting switch. If you function when the previously set do not set a new cruising speed, when cruising speed is too high for cur-...

  • Page 31: D-Mode (Drive Mode) (Xp530-A, Xp530D-A)

    Special features If the cruise control system was auto- EAU77272 D-mode (drive mode) matically deactivated, please stop and (XP530-A, XP530D-A) confirm that your vehicle is in good op- D-mode is an electronically controlled erating condition before continuing on. engine performance system with two When traveling on roads with steep mode selections (touring mode “T”...

  • Page 32: Traction Control System

    Special features range to the high-speed range. EAU77281 Traction control system The traction control system (TCS) Sports mode “S” helps maintain traction when accelerat- This mode offers a sportier engine re- ing on slippery surfaces, such as un- sponse in the low- to mid-speed range paved or wet roads.
  • Page 33 Turn the traction control system off to check the vehicle as soon as possible. help free the rear wheel if the vehicle 4. Have a Yamaha dealer check the gets stuck in mud, sand, or other soft vehicle and turn off the “...

  • Page 34: Instrument And Control Functions

    Instrument and control functions EAU77490 EAU66040 Handlebar switches Turn signal switch “ ” To signal a right-hand turn, push this Left switch to “ ”. To signal a left-hand turn, push this switch to “ ”. When re- leased, the switch returns to the center position.

  • Page 35: Indicator Lights And Warning Lights

    Instrument and control functions ECA10062 EAU77122 Indicator lights and warning NOTICE lights Do not use the hazard lights for an extended length of time with the en- gine not running, otherwise the bat- 4 5 6 tery may discharge. EAU73951 Cruise control switches See page 4-1 for an explanation of the cruise control system.
  • Page 36 Instrument and control functions cal circuits as soon as possible. have a Yamaha dealer check the on- board diagnostic system. The electrical circuit of the warning light can be checked by turning the vehicle The ABS warning light may come on power on.

  • Page 37: Speedometer

    Instrument and control functions EAU77130 EAU77141 Speedometer Tachometer 1. Speedometer 1. Tachometer 2. High-r/min zone The speedometer shows the vehicle's The tachometer shows the engine traveling speed. speed in crankshaft revolutions per When the vehicle power is turned on, minute (r/min). the speedometer needle will sweep When the vehicle power is turned on, across the speed range and return to...

  • Page 38: Multi-Function Display

    If a problem is detected in the fuel me- ter electrical circuit, the fuel meter will flash repeatedly. Have a Yamaha deal- er check the vehicle. Coolant temperature meter 1. Oil change indicator “Oil”...
  • Page 39 Instrument and control functions Drive mode display (XP530-A, changes to “C-TEMP” and “Hi” flashes. XP530D-A) Stop the vehicle and let the engine cool. (See page 8-36.) The information display cannot be changed while the engine is overheat- ing. ECA10022 NOTICE Do not continue to operate the en- gine if it is overheating.
  • Page 40  After changing the engine oil, reset the For XP530E-A, XP530-A: The grip oil change indicator. To reset the oil warmer and seat heater requires change indicator, see page 5-11. an accessory part and cannot be If the engine oil is changed before the selected.
  • Page 41 Instrument and control functions To increase the seat heater tempera- ture, push the “ ” side of the select Setting Display switch. To decrease the seat heater temperature, push the “ ” side of the select switch. ECA23980 NOTICE Middle Be sure to wear protective cloth- ...
  • Page 42 Instrument and control functions display page can be customized. (See switch to select the information display page 5-11.) page that contains the tripmeter you want to reset. Push the “ ” side of the Odometer: select switch for one second so that the tripmeter flashes, and then push the “...
  • Page 43  be continuously displayed. Have a The accuracy of the temperature Yamaha dealer check the vehicle. reading may be affected when rid- ing under 20 km/h (12 mi/h) or when stopped at traffic signals and Instantaneous fuel consumption: railroad crossings.
  • Page 44 Instrument and control functions Setting mode This function allows you to switch the fuel consumption units can be switched between Unit “L/100km” and “km/L”. For the UK: This function does not indicate on setting mode display. This function allows you to change the items shown in Display 3 information displays.
  • Page 45 Instrument and control functions dure that was used for the high set- ting. 5. When you finished changing the settings, use the select switch to highlight “ ”, and then push the “MENU” switch to return to the set- ting mode menu. Seat heater settings 1.
  • Page 46 Instrument and control functions 4. Use the select switch to highlight 3. To set the traction control system “Mid” or “Low”, and then change to “OFF”, push the select switch the setting using the same proce- “ ” side for 2 seconds. dure that was used for the high set- ting.
  • Page 47 Instrument and control functions cate on setting mode display and can- not be selected. 1. Use the select switch to highlight “Unit”. 2. Push the “MENU” switch, and then use the select switch to select the item to reset. 2. Push the “MENU” switch. The unit setting display will be shown and “L/100km”...
  • Page 48 Instrument and control functions Selecting the display items 1. Use the select switch to highlight A.TEMP TRIP-1 TRIP-2 “Display Change”. CRNT.F F.AVG RANGE 4. Use the select switch to select the item to show, and then push the “MENU” switch. 2.
  • Page 49 Instrument and control functions use the select switch to set the hours. 2. Push the “MENU” switch. 3. Use the select switch to select the desired brightness level. 4. Push the “MENU” switch, and the minute digits start flashing. 4. Push the “MENU” switch to return to the setting mode menu.

  • Page 50: Front Brake Lever

    Instrument and control functions “YES”, and then push the “MENU” EAU44912 Front brake lever switch. All items are reset to facto- ry preset or default settings. 1. Front brake lever 2. Brake lever position adjusting dial 3. “ ” mark The odometer, clock, maintenance 4.

  • Page 51: Rear Brake Lever

    Instrument and control functions EAU44922 EAU63230 Rear brake lever Rear brake lock lever 1. Rear brake lever 1. Rear brake lock lever 2. Brake lever position adjusting dial This vehicle is equipped with a rear 3. “ ” mark brake lock lever to prevent the rear 4.

  • Page 52: Abs

    Instrument and control functions EAU65580 the ABS is operating. However, special tools are required, so The Yamaha ABS (Anti-lock Brake please consult your Yamaha deal- System) features a dual electronic con- trol system, which acts on the front and ECA20100 rear brakes independently.

  • Page 53: Fuel Tank Cap

    Instrument and control functions EAU77322 out. Fuel tank cap 2. Close the lid. EWA11263 To remove the fuel tank cap WARNING Make sure that the fuel tank cap is The fuel tank cap lid lock must be re- properly installed and locked in leased via the smart key system.

  • Page 54: Fuel

    Instrument and control functions off spilled fuel with a clean, dry, EAU13222 Fuel soft cloth, since fuel may deteri- Make sure there is sufficient gasoline in orate painted surfaces or plastic the tank. parts. [ECA10072] EWA10882 4. Be sure to securely close the fuel WARNING tank cap.

  • Page 55: Fuel Tank Overflow Hose

     Check the fuel tank overflow hose same identifier when fueling. for cracks or damage, and replace Your Yamaha engine has been de- it if necessary. signed to use regular unleaded gaso-  Make sure that the fuel tank over-...

  • Page 56: Catalytic Converter

    Instrument and control functions EAU13434 EAU77342 Catalytic converter Storage compartments This model is equipped with a catalytic Front storage compartment converter in the exhaust system. EWA10863 WARNING For XP530-A, XP530D-A: See page The exhaust system is hot after op- 3-11 to open the front storage compart- eration.
  • Page 57 Do not exceed the maximum load of  Some helmets cannot be stored in 199 kg (439 lb) (XP530D-A) the rear storage compartment be- 202 kg (445 lb) (XP530-A, XP530E-A) cause of their size or shape. for the vehicle.  Do not leave your scooter unat- tended with the seat open.

  • Page 58: Windshield (Xp530E-A, Xp530-A)

    Instrument and control functions EAU77462 Windshield (XP530E-A, XP530-A) The windshield height can be changed to one of two positions. 1. Screw 3. Install the windshield to the de- sired position by installing the screws. 1. Windshield To adjust the windshield height 1.

  • Page 59: Rear View Mirrors

    Instrument and control functions EAU39672 Rear view mirrors The rear view mirrors of this vehicle can be folded forward or backward for park- ing in narrow spaces. Fold the mirrors back to their original position before rid- ing. 1. Screw access cover 1.

  • Page 60: Shock Absorber Assembly

    Do not dispose of a damaged or  Spring preload setting: worn-out shock absorber as- Minimum (soft): sembly yourself. Take the shock 7 (XP530D-A) absorber assembly to a Yamaha Standard: dealer for any service. 4 (XP530D-A) Maximum (hard): ECA10102 1 (XP530D-A)

  • Page 61: Auxiliary Dc Jack

    Instrument and control functions EAU77352 Auxiliary DC jack This model is equipped with a 12 V aux- iliary DC jack. The DC jack is located in- side the front storage compartment. 1. Rebound damping force adjusting screw Rebound damping setting: Minimum (soft): 3 (XP530D-A) turns in direction (b)*...

  • Page 62: Sidestand

    Therefore, check this system regularly and have a Yamaha dealer repair it if it does not function properly. 5-29...

  • Page 63: Ignition Circuit Cut-Off System

    Instrument and control functions EAU66771 Ignition circuit cut-off system The ignition circuit cut-off system (com- prising the sidestand switch and brake light switches) has the following func- tions.  It prevents starting when the side- stand is up, but neither brake is ap- plied.
  • Page 64 “ ”. • If a malfunction is noted, have a 3. Turn the vehicle power on. Yamaha dealer check the system 4. Keep the front or rear brake applied. before riding. 5. Push the “ON/ ” switch.

  • Page 65: For Your Safety - Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 66 • Tighten if necessary. Instruments, lights, • Check operation. — signals and switches • Correct if necessary. • Check operation of ignition circuit cut-off system. Sidestand switch • If system is not working correctly, have Yamaha dealer 5-29 check vehicle.

  • Page 67: Operation And Important Riding Points

    This model is equipped with: there is a control or function you do not  a lean angle sensor to stop the en- understand, ask your Yamaha dealer. gine in case of a turnover. In this EWA10272 case, the engine trouble warning...

  • Page 68: Starting The Engine

    Operation and important riding points warning and indicator light circuit EAU77082 Starting the engine check. ECA10251 NOTICE 3. Close the throttle completely. 4. Start the engine by pushing the See page 7-5 for engine break-in in- “ON/ ” switch while applying the structions prior to operating the ve- front or rear brake.

  • Page 69: Starting Off

    Operation and important riding points EAU45093 EAU16782 Starting off Acceleration and deceleration 1. While pulling the rear brake lever with your left hand and holding the grab bar with your right hand, push the scooter off the centerstand. The speed can be adjusted by opening and closing the throttle.

  • Page 70: Braking

    Operation and important riding points Rear EAU16794 Braking EWA10301 WARNING Avoid braking hard or suddenly  (especially when leaning over to one side), otherwise the scooter may skid or overturn. Railroad crossings, streetcar  rails, iron plates on road con- struction sites, and manhole covers become extremely slip- pery when wet.

  • Page 71: Tips For Reducing Fuel Consumption

    The vehicle can now be operated nor- mally. ECA10311 NOTICE Keep the engine speed out of  the tachometer red zone. If any engine trouble should oc-  cur during the engine break-in period, immediately have a Yamaha dealer check the vehi- cle.

  • Page 72: Parking

    Operation and important riding points EAU77960 Parking When parking, turn the vehicle power off and then the smart key off. When leaving the vehicle, make sure you apply the steering lock and center- stand lock. Take the smart key with you.

  • Page 73: Periodic Maintenance And Adjustment

    If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service. EWA15123 WARNING Turn off the engine when performing...

  • Page 74: Owner's Tool Kit

    If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.

  • Page 75: Periodic Maintenance Chart For The Emission Control System

    From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi).  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. EAU71071 Periodic maintenance chart for the emission control system...

  • Page 76: General Maintenance And Lubrication Chart

    X 1000 km X 1000 mi • Perform dynamic inspection Diagnostic system       using Yamaha diagnostic tool. check • Check the error codes.   2 * Air filter element • Replace.   • Clean.
  • Page 77 Periodic maintenance and adjustment ODOMETER CHECK OR READINGS MAINTENANCE JOB ITEM X 1000 km X 1000 mi • Check belt condition. At the initial interval and every • Replace if damaged. 10000 km (6000 mi) until 40000 13 * Drive belt •...
  • Page 78 Periodic maintenance and adjustment ODOMETER CHECK OR READINGS MAINTENANCE JOB ITEM X 1000 km X 1000 mi • Check coolant level and vehicle      for coolant leakage. 25 * Cooling system • Change. Every 3 years When the V-belt replacement 26 * V-belt •...

  • Page 79: Removing And Installing Panels

    Periodic maintenance and adjustment EAU18773 Removing and installing panels The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1.
  • Page 80 Periodic maintenance and adjustment Panel C To remove the panel Remove the screws, and then pull the panel outward. 3. Install the screws. Panel B To remove the panel 1. Remove the screw. 1. Screw 2. Panel C To install the panel Place the panel in the original position, and then install the screws.

  • Page 81: Checking The Spark Plugs

    Do not attempt to diagnose 13 N·m (1.3 kgf·m, 9.4 lb·ft) such problems yourself. Instead, have a Yamaha dealer check the vehicle. If a spark plug shows signs of electrode If a torque wrench is not available when erosion and excessive carbon or other installing a spark plug, a good estimate deposits, it should be replaced.

  • Page 82: Canister

    Periodic maintenance and adjustment EAU36112 EAU77360 Canister Engine oil and oil filter cartridge The engine oil level should be checked before each ride. In addition, the oil must be changed and the oil filter car- tridge replaced at the intervals speci- fied in the periodic maintenance and lubrication chart.
  • Page 83 Periodic maintenance and adjustment 1. Engine oil level check window 1. Engine oil drain bolt 2. Maximum level mark 2. O-ring 3. Minimum level mark 3. Gasket 4. If the engine oil is below the mini- 5. Check the O-ring for damage and mum level mark, add sufficient oil replace it if necessary.
  • Page 84 Oil filter cartridge: 17 N·m (1.7 kgf·m, 12 lb·ft) An oil filter wrench is available at a Yamaha dealer. 9. Install the engine oil drain bolt and its new gasket, and then tighten 7. Apply a thin coat of clean engine the bolt to the specified torque.
  • Page 85 Periodic maintenance and adjustment reset after the oil change for the next Recommended engine oil: periodic oil change to be indicated at See page 10-1. Oil quantity: the correct time. Oil change: 2.60 L (2.75 US qt, 2.29 Imp.qt) With oil filter removal: 2.90 L (3.07 US qt, 2.55 Imp.qt) Be sure to wipe off spilled oil on any parts after the engine and exhaust sys-...

  • Page 86: Coolant

    Periodic maintenance and adjustment EAU20071 Coolant The coolant level should be checked before each ride. In addition, the cool- ant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAU52024 To check the coolant level 1.

  • Page 87: Replacing The Air Filter Element

    Replacing the air filter element added to the coolant, have a The air filter element should be re- Yamaha dealer check the anti- placed at the intervals specified in the freeze content of the coolant as periodic maintenance and lubrication soon as possible, otherwise the chart.

  • Page 88: Checking The Engine Idling Speed

    [ECA10482] Check the engine idling speed and, if 5. Install the air filter case cover by in- necessary, have it corrected by a stalling the screws. Yamaha dealer. 6. Install the panel. Engine idling speed: 1100–1300 r/min 8-16...

  • Page 89: Checking The Throttle Grip Free Play

    Measure the throttle grip free play as and/or engine noise. To prevent this shown. from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 1. Throttle grip free play Throttle grip free play: 1.0–3.0 mm (0.04–0.12 in)

  • Page 90: Tires

    The tires must be checked before each ride. If the center tread depth reaches the specified limit, if the tire has a nail or glass fragments in it, or if the sidewall is cracked, have a Yamaha dealer re- place the tire immediately. 8-18...
  • Page 91 Always make sure that the valve  EWA10472 caps are securely installed to WARNING prevent air pressure leakage. Have a Yamaha dealer replace  Use only the tire valves and  excessively worn tires. Besides valve cores listed below to being illegal, operating the vehi- avoid tire deflation during a ride.

  • Page 92: Cast Wheels

    The wheel rims should be checked for cracks, bends, warpage or oth- er damage before each ride. If any damage is found, have a Yamaha dealer replace the wheel. Do not attempt even the smallest repair to the wheel. A deformed or cracked wheel must be replaced.

  • Page 93: Adjusting The Rear Brake Lock Cable

    (b). WARNING! If proper adjustment cannot be obtained as described, have a Yamaha dealer make this ad- justment. [EWA16151] Check that the rear brake lock is re- leased, and then make sure that the rear wheel could rotate smoothly.

  • Page 94: Checking The Rear Brake Lock

    Rear brake lever is applied. If the indicator has passed the wear indicator groove, have a Yamaha dealer check the rear brake lock. 4. Make sure that there are no tears or cracks on the rubber boot.

  • Page 95: Checking The Brake Fluid Level

    If the brake 1. Minimum level mark fluid level goes down suddenly, have a Specified brake fluid: Yamaha dealer check the cause before DOT 4 further riding. EWA15991 WARNING Improper maintenance can result in loss of braking ability.

  • Page 96: Changing The Brake Fluid

    Have a Yamaha dealer change the The drive belt slack should be checked brake fluid at the intervals specified in and adjusted by a Yamaha dealer at the periodic maintenance and lubrica- the intervals specified in the periodic tion chart. In addition, have the oil seals maintenance and lubrication chart.

  • Page 97: Checking And Lubricating The Cables

    Yamaha dealer at the intervals speci- ed if necessary. If a cable is damaged fied in the periodic maintenance chart.

  • Page 98: Lubricating The Front And Rear Brake Levers

    If the centerstand or sidestand does Recommended lubricant: not move up and down smoothly, Silicone grease have a Yamaha dealer check or re- pair it. Otherwise, the centerstand or sidestand could contact the ground and distract the operator, resulting in a possible loss of control.

  • Page 99: Checking The Front Fork

    If any free there is no danger of it falling play can be felt, have a Yamaha over. dealer check or repair the steering. [EWA10752] 2.

  • Page 100: Checking The Wheel Bearings

    If there is play in the wheel The battery is located under panel B. hub or if the wheel does not turn (See page 8-7.) smoothly, have a Yamaha dealer check This model is equipped with a VRLA the wheel bearings. (Valve Regulated Lead Acid) battery.
  • Page 101 Storing a discharged battery can cause permanent battery damage. To charge the battery Have a Yamaha dealer charge the bat- tery as soon as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more quickly if the vehicle is equipped with optional electrical accessories.

  • Page 102: Replacing The Fuses

    Periodic maintenance and adjustment (XP530E-A, XP530-A) EAU77694 Replacing the fuses 1 2 3 The main fuse box and the fuse box, which contains the fuses for the individ- ual circuits, are located under panel A. (See page 8-7.) If a fuse is blown, replace it as follows.
  • Page 103 Periodic maintenance and adjustment (XP530E-A, XP530-A) (XP530D-A) 1. Spare fuse 1. Brake light fuse 2. Seat lock fuse 2. Cruise control fuse 3. Signaling system fuse 3. Spare fuse 4. Ignition fuse 5. Taillight fuse 6. Radiator fan motor fuse 7.

  • Page 104: Vehicle Lights

    LED lighting. If a light ABS control unit fuse: does not come on, check the fuses and 7.5 A then have a Yamaha dealer check the ABS motor fuse: vehicle. 30.0 A If a front turn signal light or license plate ABS solenoid fuse: 15.0 A...

  • Page 105: Replacing A Front Turn Signal Light Bulb

    Periodic maintenance and adjustment EAU52322 EAU58010 Replacing a front turn signal Replacing the license plate light bulb light bulb 1. Place the scooter on the center- 1. Remove the license plate light unit stand. by removing the nuts and collars, 2.

  • Page 106: Troubleshooting

    However, should your scooter re- (See page 8-28.) quire any repair, take it to a Yamaha If the smart key system does not work dealer, whose skilled technicians have after checking the above items, have a...

  • Page 107: Troubleshooting Charts

    Check the vehicle. compression. 4. Compression The engine does not start. There is compression. Have a Yamaha dealer check the vehicle. Operate the electric starter. There is no Have a Yamaha dealer check the vehicle. compression. 8-35...

  • Page 108: Engine Overheating

    Start the engine. If the engine overheats again, The coolant level is have a Yamaha dealer check and repair the cooling system. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 109: Emergency Mode

    Periodic maintenance and adjustment EAU77371 The smart key system indicator Emergency mode light on the speedometer will come When the smart key is lost, damaged, on for three seconds to indicate or its battery has discharged, the vehi- the transition to emergency mode. cle can still be turned on and the engine started.
  • Page 110 Periodic maintenance and adjustment  cess.  When the smart key system indi- cator light is allowed to flash 10 or more times. 8. Press the “ON/ ” switch while the smart key system indicator light is Release the “ / ”...

  • Page 111: Scooter Care And Storage

    Be Rust and corrosion can develop even if sure to consult a Yamaha dealer for high-quality components are used. A advice on what products to use be- rusty exhaust pipe may go unnoticed fore cleaning the vehicle.
  • Page 112 Scooter care and storage structed. Also, thoroughly rinse pounds for plastic may leave the area off with water, immedi- scratches on the windshield. ately dry it, and then apply a cor- Test the product on a small hid- rosion protection spray. den part of the windshield to Improper cleaning can damage make sure that it does not leave...
  • Page 113  Consult a Yamaha dealer for ad- 3. To prevent corrosion, it is recom- vice on what products to use. mended to apply a corrosion pro- ...

  • Page 114: Storage

    Scooter care and storage EAU36554 head so that the electrodes are Storage grounded. (This will limit spark- ing during the next step.) Short-term d. Turn the engine over several Always store your scooter in a cool, dry times with the starter. (This will place and, if necessary, protect it coat the cylinder walls with oil.) against dust with a porous cover.
  • Page 115 Scooter care and storage storing the scooter.

  • Page 116: Specifications

    Regular unleaded gasoline (Gasohol [E10] Weight: acceptable) Curb weight: Fuel tank capacity: 213 kg (470 lb) (XP530-A, XP530E-A) 15 L (4.0 US gal, 3.3 Imp.gal) 216 kg (476 lb) (XP530D-A) Fuel reserve amount: Engine: 3.0 L (0.79 US gal, 0.66 Imp.gal)
  • Page 117 Type: Loading: Swingarm Maximum load: Spring: 199 kg (439 lb) (XP530D-A) Coil spring 202 kg (445 lb) (XP530-A, XP530E-A) Shock absorber: * (Total weight of rider, passenger, cargo Gas-hydraulic damper and accessories) Wheel travel: Tire air pressure (measured on cold 117 mm (4.6 in)
  • Page 118 Specifications Meter lighting: Electronic throttle valve fuse: 7.5 A High beam indicator light: Turn signal indicator light: Engine trouble warning light: ABS warning light: Cruise control “SET” indicator light: LED (XP530D-A) Cruise control “ON” indicator light: LED (XP530D-A) Smart key system indicator light: Traction control system indicator/warning light: Fuse(s):...

  • Page 119: Consumer Information

    5-23.) Record the information on this label in the space provided. This in- formation will be needed when ordering 1. Vehicle identification number spare parts from a Yamaha dealer. The vehicle identification number is stamped into the frame. 11-1...

  • Page 120: Diagnostic Connector

     Vehicle status and engine perfor- mance data  Fuel-injection and emission-relat- ed data Yamaha will not disclose this data to a third party except:  With the consent of the vehicle owner  Where obligated by law ...

  • Page 121: Index

    Index Fuses, replacing........8-30 ABS ............5-19 ABS warning light ........5-3 Handlebar switches......... 5-1 Acceleration and deceleration ....7-3 Hazard switch ......... 5-1 Air filter element, replacing....8-15 High beam indicator light ......5-2 Auxiliary DC jack ........5-28 Horn switch ..........5-1 How to lock the centerstand....3-10 How to lock the steering......
  • Page 122 Turn signal indicator lights ...... 5-2 Turn signal light bulb (front), replacing ..........8-33 Turn signal switch ........5-1 Valve clearance ........8-17 Vehicle identification number ....11-1 Vehicle lights......... 8-32 Wheel bearings, checking..... 8-28 Wheels ..........8-20 Windshield (XP530E-A, XP530-A)..5-25 12-2...
  • Page 124 Original instructions PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2017.01-1.1×1 !

This manual is also suitable for:

Xp530d-aXp530-a

Table of Contents