Table of Contents
Advertisement
Smart key system
the "ON/ " switch one more time.
If the centerstand continues to be
locked and will not release, the
smart key system indicator light
1
will flash 16 times and the center-
stand lock release operation will
stop midway. Rock the vehicle for-
2
ward and backward to help release
the centerstand lock and then
press the "ON/ " switch again.
3
NOTICE
4
If the steering lock or centerstand
lock will not release and the smart
key system indicator light is flash-
5
ing, have a Yamaha dealer check the
smart key system.
6
3. The power of the vehicle is turned
on when all locks have been re-
leased. The multi-function display
7
will come on.
4. The engine can now be started.
(See page 7-2.)
8
TIP
See page 8-37 for information about
9
emergency mode and how to turn the
vehicle power on without the smart key.
10
11
12
13
14
Powering off the vehicle
To turn the vehicle power off and stop
the engine if it is running, press the
"OFF/LOCK" switch.
ECA15826
1. "OFF/LOCK" switch
Upon authentification of the smart key,
the beeper will sound once to confirm
that the vehicle power has been suc-
cessfully turned off and the storage
compartment and fuel tank cap lid locks
will be released.
TIP
The rider must turn off the power of
the vehicle manually.
The power of the vehicle will not
turn off automatically even if the
smart key is moved out of operat-
ing range of the smart key system.
The power of the vehicle cannot be
turned off via the "OFF/LOCK"
switch when the vehicle is moving.
If the smart key is not within operating
range or cannot communicate with the
vehicle
"OFF/LOCK" switch, the vehicle will not
be turned off and the beeper will sound
for three seconds (the smart key sys-
tem indicator light will also flash) to alert
you that the power was not successfully
turned off. Confirm the location and
condition of the smart key and try pow-
3-8
when
you
press
EAU78031
1
the
- Quick Links:
- Removing and Installing Panels
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
