Configuring An Erspan Type Iii Source Session - Cisco Nexus 5600 Series Configuration Manual
Nx-os system management
Hide thumbs
Also See for Nexus 5600 Series:
- Hardware installation manual (100 pages) ,
- Reference (480 pages)
Table of Contents
Advertisement
Configuring ERSPAN
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Configuring an ERSPAN Type III Source Session
Procedure
Step 1
OL-31641-01
Command or Action
[no] filter access-group acl_filter
Example:
switch(config-erspan-src)# filter
access-group erspan_acl_filter
ip ttl ttl-number
Example:
switch(config-erspan-src)# ip ttl
5
ip dscp dscp_value
Example:
switch(config-erspan-src)# ip dscp
42
no shut
Example:
switch(config-erspan-src)# no shut
exit
Example:
switch(config-erspan-src)# exit
switch(config)# exit
copy running-config startup-config
Example:
switch(config-erspan-src)# copy
running-config startup-config
Command or Action
configuration terminal
Example:
switch# config t
switch(config)#
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
Configuring an ERSPAN Type III Source Session
Purpose
Configures the ACL filter for packets in this ERSPAN
session. The ACL filter can be a MAC or an IP
access-list.
(Optional)
Configures the IP time-to-live (TTL) value of the
packets in the ERSPAN traffic. Valid values are from
1 to 255. The default value is 255.
(Optional)
Configures the IP Differentiated Services Code Point
(DSCP) value of the packets in the ERSPAN traffic.
Valid values are from 0 to 63. The default value is 0.
Enables the ERSPAN source session. By default, the
session is created in the shut state.
Updates the configuration and exits ERSPAN source
session configuration mode.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
203
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
