Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
How to Configure Port Security
Storm control is supported on physical interfaces. You can also configure storm control on an EtherChannel.
Note
When storm control is configured on an EtherChannel, the storm control settings propagate to the
EtherChannel physical interfaces.
Follow these steps to storm control and threshold levels:
Before You Begin
Storm control is supported on physical interfaces. You can also configure storm control on an EtherChannel.
When storm control is configured on an EtherChannel, the storm control settings propagate to the EtherChannel
physical interfaces.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. storm-control {broadcast | multicast | unicast} level {level [level-low] | bps bps [bps-low] | pps pps
[pps-low]}
5. storm-control action {shutdown | trap}
6. end
7. show storm-control [interface-id] [broadcast | multicast | unicast]
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3
interface interface-id
Example:
Switch(config)# interface
gigabitethernet1/0/1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1496
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Enters the global configuration mode.
Specifies the interface to be configured, and enter interface configuration mode.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
