Changing The Quiet Period - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
Command or Action
timer reauthenticate 180
Step 5
end
Example:
Switch(config-if)# end
Changing the Quiet Period
When the switch cannot authenticate the client, the switch remains idle for a set period of time and then tries
again. The authentication timer inactivity interface configuration command controls the idle period. A failed
authentication of the client might occur because the client provided an invalid password. You can provide a
faster response time to the user by entering a number smaller than the default.
Beginning in privileged EXEC mode, follow these steps to change the quiet period. This procedure is optional.
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. authentication timer inactivity seconds
4. end
5. show authentication sessions interface interface-id
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Purpose
• reauthenticate—Time in seconds after which an automatic
re-authentication attempt is initiated
• restart value—Interval in seconds after which an attempt is made
to authenticate an unauthorized port
This command affects the behavior of the switch only if periodic
re-authentication is enabled.
Returns to privileged EXEC mode.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure 802.1x Port-Based Authentication
Purpose
Enters the global configuration mode.
1369
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
