Configuring Mac Authentication Bypass - Cisco Catalyst 2960 series Configuration Manual
Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs
Also See for Catalyst 2960 series:
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages) ,
- Configuration manual (120 pages)
Table of Contents
Advertisement
How to Configure 802.1x Port-Based Authentication
Command or Action
Step 4
end
Example:
Switch(config-if)# end
Step 5
show authentication sessions interface interface-id
Example:
Switch# show authentication sessions interface
gigabitethernet2/0/3
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Configuring MAC Authentication Bypass
Beginning in privileged EXEC mode, follow these steps to enable MAC authentication bypass. This procedure
is optional.
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. authentication port-control auto
4. mab [eap]
5. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1388
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enters the global configuration mode.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
