Table of Contents
Advertisement
3. Hold the cover against the engine and slide the cover toward the front of the
Replacing the Model 210 cover: To replace the top cover:
1. Align the top cover with the top of the engine, about 25 mm (1 in.) from the front
2. Hold the cover against the engine and slide the cover toward the front of the
18
IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide
engine until the cover clicks into place.
1
Slots
2
Left-side cover
of the appliance; the flanges on the left and right sides of the cover should be
on the outside of the engine chassis.
engine until the cover clicks into place.
1
Flange
2
Top cover
3
Side latches
Advertisement
Table of Contents
