Snmpv1 Trap Configuration - Siemens SCALANCE X-300 Configuration Manual
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE X-300:
- Operating instructions manual (312 pages) ,
- Manual (290 pages) ,
- Compact operating instructions (84 pages)
Table of Contents
Advertisement
Configuration using Web Based Management and Command Line Interface
4.4 The Agent menu
Syntax of the Command Line Interface
Table 4- 21
snmp [D|3|A]
getcomm [string]
setcomm [string]
traps [E|D]
4.4.3.2
SNMPv1 Trap Configuration
SNMP traps for alarm events
If an alarm event occurs, an IE switch can send traps (alarm frames) to up to 10 different
(network management) stations at the same time. Traps are only sent when events as
specified in the Agent Event Configuration menu occur (see Section "Agent Event
Configuration").
Note
Traps are sent only when the "Traps" option was selected in "SNMP Configuration".
96
Agent SNMP Configuration - CLI\AGENT\SNMP>
Command
Disables / enables SNMP. The meaning
of the parameters is as follows:
D
•
Disables SNMP.
3
•
Enables only SNMPv3.
A
•
Enables SNMPv1, SNMPv2
and SNMPv3.
Specifies the read community string
(maximum length 20 characters). The
default is "public".
Specifies the read/write community string
(maximum length 20 characters). The
default is "private".
Enables / disables SNMPv1 traps.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator only.
Default value: SNMPv1, v2 and
v3 are enabled.
Administrator only.
Administrator only.
Administrator only.
SCALANCE X-300 / X-400
Hide quick links:
Advertisement
Table of Contents
