Table of Contents
Advertisement
LAN/DHCP Settings
Static DNS1 and DNS2
Configuring Option 82 Circuit
Step 8
To configure the Option 82 Circuit enter the following information.
Description
Circuit ID
Step 9
Click Next and enter the following:
IP Address & Subnet Mask
Step 10
Click Next.
Step 11
To add a new DHCP Configuration, configure the following:
Client Lease Time
Range Start and Range End
DNS Server
Static DNS 1 and Static
DNS 2
WINS Server
DHCP Options
Step 12
Click Ok, then click Apply.
RV345/345P Administration Guide
58
(Optional) IP address of a DNS server. If you enter a second DNS server, the device
uses the first DNS server to respond. Specifying a DNS server can provide faster access
than using a DNS server that is dynamically assigned. Default is 0.0.0.0.
Enter description for option 82 client.
Enhances the validation security to determine about the information which is provided
in the Option 82 Circuit ID. Enter the circuit ID and its format.
Enter the IP address and subnet mask of the device.
Amount of time that a network user is allowed to connect to the router with the current
IP address. Enter the amount of time in minutes. Valid values are 5 to 3200 minutes.
Default is 1460 minutes (24 hours).
The range start and end of IP addresses that can be assigned dynamically. The range
can be up to the maximum number of IP addresses that the server can assign without
overlapping the PPTP and SSL VPN. For example, if the router uses the default LAN
IP address, 192.168.1.1, the starting value must be 192.168.1.2 or greater.
DNS service type; where the DNS server IP address is acquired.
Static IP address of a DNS Server. (Optional) if you enter a second DNS server, the
device uses the first DNS server to respond to a request.
Optional IP address of a Windows Internet Naming Service (WINS) server that resolves
NetBIOS names to IP addresses. Default is 0.0.0.0.
• Option 66 — Enter the IP address or the hostname of a single TFTP server.
• Option 150 — Enter the IP addresses of a list of TFTP servers.
• Option 67 — Enter the boot filename.
LAN
- Quick Links:
- Getting Started
- Wan Settings
Hide quick links:
Advertisement
Table of Contents
