Table of Contents
Advertisement
WAN
IP Assignment
PPTP Server IP/FQDN
Username
Password
DNS Server
Static DNS 1 & 2
Connect Mode
Authentication Type
MPPE Encryption
When the IPv4 connection uses L2TP
In the L2TP Settings section, enter the following information.
IP Assignment
L2TP Server IP/FQDN
Username
Password
DNS Server
Static DNS 1 & 2
Connect Mode
Authentication Type
When the IPv6 connection uses Bridge
For DCHP, select this option to enable DHCP to provide an IP address. For Static IP,
select this option and provide an IP address, netmask, and the IP address of the default
gateway.
Enter the name of the server.
The username assigned to you by the ISP.
The password assigned to you by the ISP.
Select Use PPTP Provided DNS Server or Use DNS.
Enter the IP address of the primary and or secondary Static DNS in the fields.
Select Connect on Demand if your ISP charges when connected. Enter the maximum
idle time, in seconds, to wait before terminating the connection due to inactivity. Default
is 5 minutes.
Select Keep Alive to periodically check the connection, and to re-establish the connection
when it is disconnected. .
Select the authentication type from the drop-down list (Auto, PAP, CHAP, MS-CHAP,
MS-CHAPv2).
Check to enable MPPE encryption.
For DCHP, select this option to enable DHCP to provide an IP address. For Static IP,
select this option and provide an IP address, netmask, and the IP address of the default
gateway.
Enter the name of the server.
The username assigned to you by the ISP.
The password assigned to you by the ISP.
Select Use L2TP Provided DNS Server or Use DNS.
Enter the IP address of the primary and or secondary Static DNS in the fields.
Select Connect on Demand if your ISP charges when connected. Enter the maximum
idle time, in seconds, to wait before terminating the connection due to inactivity. Default
is 5 minutes.
Select Keep Alive to periodically check the connection, and to re-establish the connection
when it is disconnected.
Select the authentication type from the drop-down list (Auto, PAP, CHAP, MS-CHAP,
MS-CHAPv2).
WAN Settings
RV345/345P Administration Guide
39
- Quick Links:
- Getting Started
- Wan Settings
Hide quick links:
Advertisement
Table of Contents
