Rv345/345P Administration Guide - Cisco RV345 Administration Manual

Hide thumbs Also See for RV345:

Quick start manual (13 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

Table of Contents

VPN Status

Site-to-Site Tunnel Status

• Tunnel(s) Used — VPN tunnels in use.

• Tunnel(s) Available — Available VPN tunnels.

• Tunnel(s) Enabled — VPN tunnels enabled.

• Tunnel(s) Defined — Defined VPN tunnels.

In the Connection Table, you can add, edit, delete, or refresh a tunnel. (See

can also click on Column Display Selection to select the column headers displayed in the Connection Table.

Client-to-Site Tunnel Status

In this mode, the client from Internet connects to the server to access the corporate network/LAN behind the

server. For a secure connection, you can implement a client-to-site VPN. You can view all the Client-to-Tunnel

connections, add, edit, or delete the connections in the Connection Table. (See

The Connection Table displays the following:

• Group or Tunnel Name — Name of the VPN tunnel. This is for reference purposes only and does not

match the name used at the other end of the tunnel.

• Connections — Status of the connection.

• Phase2 Encryption/Auth/Group — Phase 2 encryption type

(NULL/DES/3DES/AES-128/AES-192/AES-256), authentication method (NULL/MD5/SHA1), and

DH group number (1/2/5).

• Local Group — IP address and subnet mask of the local group.

SSL VPN Status

A Secure Sockets Layer virtual private network (SSLVPN) allows users to establish a secure, remote-access

VPN tunnel to this device by using a web browser. SSL VPN provides secure, easy access to a broad range

of web resources and web-enabled applications from almost any computer on the Internet. Here, you can view

the status of the SSL VPN tunnels.

• Tunnel(s) Used — SSL VPN Tunnels used for connection.

• Tunnel(s) available — Available tunnels for the SSL VPN connection.

The Connection Table shows the status of the established tunnels. You can also add edit or delete connections.

• Policy Name — Name of the policy applied on the tunnel.

• Session — Number of sessions.

You can also add, edit or delete a SSL VPN. (See

PPTP Tunnel Status

Point-to-Point Tunneling Protocol has the capability to encrypt data with 128-bit. It is used to ensure that

messages sent from one VPN node to another are secure.

• Tunnel(s) Used — PPTP Tunnels used for the VPN connection.