Brother DCP-110C Quick Setup Manual page 15
Hide thumbs
Also See for DCP-110C:
- Software user's manual (175 pages) ,
- User manual (107 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
5
After reading and accepting the ScanSoft
®
PaperPort
9.0SE License Agreement, click
Yes.
6
The installation of PaperPort
automatically start and is followed by the
installation of MFL-Pro Suite.
7
When the Brother MFL-Pro Suite Software
License Agreement window appears, click
Yes, if you agree to the Software Licence
Agreement.
8
Select Local Connection, and then click
Next.
The installation will continue.
9
®
®
9.0SE will
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the machine.
To connect the USB cable to the machine:
1. Lift the scanner cover to its open
position.
2. Connect the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
Warning
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
Continued...
symbol. You
13
Advertisement
Chapters
Table of Contents
