For Network Users (Dcp-310Cn Only); Network User's Guide Chapter Map; Restoring The Network Settings To Factory Default; For Network Users - Brother DCP-110C Quick Setup Manual
Hide thumbs
Also See for DCP-110C:
- Software user's manual (175 pages) ,
- User manual (107 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
■ For Network Users (DCP-310CN only)
This section is for using the machine on a network. An administrator should set up the machine
using the following steps.
Network User's Guide Chapter Map
®
Windows
98/Me
®
Windows
2000/XP
®
Macintosh
OS2 Warp Server, LAN Server
Restoring the Network Settings to Factory Default
To restore all network settings of the internal Print/Scan server to factory default, please follow
the steps below.
1
Make sure the machine is not operating, then disconnect all the cables from the machine (except
power cable).
2
Press Menu.
3
▲
▼
Press
or
Press Set.
4
▲
▼
Press
or
Press Set.
5
▲
Press
to select 1.Reset.
6
▲
Press
again to select 1.Yes.
7
The machine will restart, re-connect cables once this is complete.
28
Peer-to-Peer
Peer-to-Peer
to select 3.LAN.
to select
0.Factory
Reset.
TCP/IP
Chapter 4
Network Printing from Windows
TCP/IP
Chapter 4
Network Printing from Windows
TCP/IP
Chapter 5
Network Printing from Macintosh
TCP/IP
Chapter 4
Network Printing from Windows
®
®
®
®
Advertisement
Chapters
Table of Contents
