For Usb Interface Cable Users; For Mac Os ® 8.6 To 9.2; To 9.2 - Brother DCP-110C Quick Setup Manual
Hide thumbs
Also See for DCP-110C:
- Software user's manual (175 pages) ,
- User manual (107 pages) ,
- Quick setup manual (24 pages)
Table of Contents
Advertisement
Step 2
For USB Interface Cable Users
For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 9.
1
Disconnect the machine from the power
socket and from the Macintosh
already connected an interface cable.
(Example for the U.K.)
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
18
Installing the Driver & Software
®
8.6 to 9.2
®
, if you have
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
7
Connect the USB interface cable to your
®
Macintosh
, and then connect it to the
machine.
To connect the USB cable to the machine:
1. Lift the scanner cover to its open
position.
2. Connect the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
®
.
symbol. You
Advertisement
Chapters
Table of Contents
