Table of Contents
Advertisement
4. Keyboard/Mouse power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard/mouse
wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the
computer when you press a key on the keyboard (the default is the
Space Bar) or use the mouse. This feature requires an ATX power sup-
ply that can supply at least 1A on the +5VSB lead, and a correspond-
ing setting in the BIOS.
®
P5M2-M/C_TS100-E4 Keyboard Power Setting
5. VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard XGI Volari
Z7
PCI VGA controller. Set to pins 1-2 to activate the VGA feature.
®
®
P5M2-M/C_TS100-E4 VGA Setting
ASUS TS100-E4/PI2
KBPWR1
1 2
2 3
+5V
+5VSB
(Default)
VGA_EN1
1
2
2 3
Enable
Disable
(Default)
3-7
Advertisement
Table of Contents
