Table of Contents
Advertisement
5.2.2 Creating a RAID 1 set (mirrored)
To create a RAID 1 set:
1. From the utility main menu, select 1. Create RAID Volume, then press
<Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select
2. Enter a name for the RAID 1 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow key
to select RAID 1(Mirror), then press <Enter>.
4 When the Disks item is highlighted, press <Enter> to select the hard
disk drives to configure as RAID. The SELECT DISKS screen appears.
5 Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6. When the Capacity item is highlighted, key in the RAID volume capac-
ity that you want, then press <Enter>. The default value indicates the
maximum allowed capacity.
7. Press <Enter> when the Create Volume item is highlighted. This warning
message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
8. Press <Y> to create the RAID volume and return to main menu or <N>
to go back to Create Volume menu.
ASUS TS100-E4/PI2
[
CREATE ARRAY MENU
Name:
Volume1
RAID Level:
RAID1(Mirror)
Disks:
Select Disks
Strip Size:
N/A
Capacity:
XX.X
GB
Create Volume
[ DISK/VOLUME INFORMATION ]
cannot contain special characters.
]
5-7
Advertisement
Table of Contents
