Table of Contents
Advertisement
3. After selecting the drive to rebuild, press <F10>. The indicator for the
selected drive now shows RBLD.
4. When prompted, press <Y> to to rebuild the drive.
5. When rebuild is complete, press any key to continue.
Using the Objects command
To rebuild a failed hard disk drive using the Objects command:
1. From the Management Menu, select Objects, then select Physical Drive
from the menu.
2. Use the arrow keys to select the physical drive you want to rebuild,
then press <Enter>.
3. Select Rebuild from the pop-up menu, then press <Enter>.
4. When prompted, press <Y> to to rebuild the drive.
5. When rebuild is complete, press any key to continue.
5-28
Chapter 5: RAID Configuration
Advertisement
Table of Contents
