Table of Contents
Advertisement
3. Secure the HDD to the cage with
two screws on both sides of the
cage.
4. Reinstall the HDD cage to the
chassis. Align the HDD cage and
bay assembly rails, then carefully
push the HDD cage until it is
flushed to the chassis.
5. Connect one end of the supplied
7-pin SATA cable to the SATA
connector at the back of the drive.
6. Connect the other end to a SATA
connector on the motherboard.
See page 3-6 for the location of
the SATA connectors.
7. Connect a 4-pin power plug from
the power supply unit to the
power connector at the back of
the drive.
ASUS TS100-E4/PI2
6
5
2-13
Advertisement
Table of Contents
