Print Head Holder Does Not Move To The Position For Replacing - Canon MG5600 series Online Manual

Canon mg5600 series all in one printer

Hide thumbs Also See for MG5600 series:

Table of Contents

Print Head Holder Does Not Move to the Position for Replacing

Is the POWER lamp off?

Check if the POWER lamp is lit.

The print head holder will not move unless the power is on. If the POWER lamp is off, close the operation panel

and turn the machine on.

While the POWER lamp is flashing, the machine is initializing. Wait until the POWER lamp stops flashing and

remains lit, and then open the operation panel again.

Is an error message displayed on the LCD?

Close the operation panel, follow the Support Code (error number) displayed in the error message to resolve the

error, and then reopen it. For details on how to resolve the error, refer to

Has the operation panel been left open for 10 minutes or longer?

If the operation panel is left open for more than 10 minutes, the print head holder moves to the position to protect

it to prevent the print head from drying out. Close and reopen the operation panel to return the print head holder

to the position for replacing.

Has the machine been printing continuously for a long period?

Close the operation panel, wait a while, then reopen it.

If the machine has been printing continuously for a long time, the print head holder may not move to the position

for replacing since the print head may overheat.

• Opening the operation panel while printing moves the print head holder to the position to protect it.

Close the operation panel, and reopen it after printing finishes.

Support Code

Show Quick Links

Table of Contents