Canon MG5600 series Online Manual page 240
Canon mg5600 series all in one printer
Hide thumbs
Also See for MG5600 series:
- Online manual (910 pages) ,
- User manual (4 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Note
• Pressing the right Function button displays the security setting.
The password required when connecting from the external device is also displayed.
• You can specify the access point name (SSID) and the security setting optionally.
Setting of the Access Point Mode
7. Press the left Function button.
The access point mode is enabled and the machine can be used as an access point.
Printing/Scanning with the Access Point Mode
Print/Scan with the access point mode following the procedure below.
1. Connect an external device such as a computer or a smartphone to the machine via
wireless LAN.
Perform wireless LAN settings with your external device, then assign the access point name specified
for the machine as a destination.
Note
• For details on how to perform wireless LAN settings with an external device, refer to the
device's instruction manual.
• When a WPA2-PSK (AES) password is valid on the machine, entering the password is required
to connect an external device to the machine via wireless LAN. Enter the password specified for
the machine.
2. Start printing or scanning from an external device such as a computer or a smartphone.
Note
• For details on how to print or scan from an external device such as a computer or a smartphone
via wireless LAN, refer to the device's or application's instruction manual.
How to terminate the Access Point Mode
In environments that the machine is connected with the computer over the wireless LAN usually, set the
machine to the wireless LAN connection following the procedure below when you finish using the machine
with the access point mode temporarily.
1. Select
Setup on the HOME screen.
LCD and Operation Panel
2. Select
Device settings, then press the OK button.
240
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
