Changing The Wpa/Wpa2 Detailed Settings - Canon MG5600 series Online Manual

Canon mg5600 series all in one printer

Hide thumbs Also See for MG5600 series:

Table of Contents

Changing the WPA/WPA2 Detailed Settings

• This screen is not available depending on the printer you are using.

To change the wireless network settings of the printer, connect the printer and the computer with a USB

cable temporarily. If you modify the wireless network settings of the computer over wireless connection

without USB connection, your computer may not be able to communicate with the machine after modifying

the settings.

The example screenshots in this section refer to the WPA detailed settings.

Start up IJ Network Tool.

2. Select the printer in Printers:.

When the printer is connected to the computer with a USB cable temporarily, select the printer with USB

appearing in the Connected to column.

3. Click the Configuration... button.

4. Click the Wireless LAN button.

5. Select Use WPA/WPA2 in Encryption Method: and click Configuration....

6. Enter the passphrase, then click OK.

1. Passphrase:

Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63

alphanumeric characters or a 64-digit hexadecimal value.

If you do not know the access point passphrase, refer to the instruction manual provided with the

access point or contact its manufacturer.

2. Dynamic Encryption Type:

The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure

encryption) automatically.

• If Auto is not displayed on Dynamic Encryption Type:, select either TKIP(Basic Encryption) or

AES(Secure Encryption).

Show Quick Links

Table of Contents