Duplex Unit; Removing The Duplex Unit; Removing The Reversing Flapper Solenoid; Removing The Reversal Motor - Canon iR5000 Service Manual

Hide thumbs Also See for iR5000:

Table of Contents

CHAPTER 5 PICK UP/FEEDING SYSTEM

9.6 Duplex Unit

1) Slide the duplex unit out of the ma-

2) Remove the three screws [1] and two

knobs [2]; then, detach the front cover

3) Holding the left and right grips [4] of

the duplex unit, take it out of the ma-

Take care not to trap your hand

between the grip and the rail.

Further, do not place the duplex

unit where it may suffer dam-

1) Remove the duplex unit from the ma-

2) Disconnect the connector [1], and free

the harness [3] from the guide [2].

3) Remove the two mounting screws [4],

and detach the reversing flapper sole-

(The steps of installation refer to 9.6.17

"Mounting the Reversing Flapper

1) Remove the front cover of the duplex

2) Disconnect the connector [1].

3) Remove the three mounting screws [2],

and detach the reversal motor [3] to-

gether with its support plate.

Download Free Service Manual at http://printer1.blogspot.com

2000 2000 2000 2000

CANON iR5000/iR6000 REV.0 JULY 2000

Show Quick Links

Table of Contents