Mounting The Side Seal - Canon iR5000 Service Manual
Hide thumbs
Also See for iR5000:
- Service manual (839 pages) ,
- Service handbook (252 pages) ,
- Driver manual (86 pages)
Table of Contents
Advertisement
CHAPTER 4 IMAGE FORMATION SYSTEM
7.11.4 Mounting the Side Seal
1) Mount the side seal [1] to the cleaner
housing where indicated (both ends).
AT this time, be sure that the edge of
the side seal is positioned as follows:
• When replacing the side seal [1] at
the front, push the magnet roller [2]
toward the rear and then make sure
that the inner end of the side seal is
within the area [3] of the washer.
• When replacing the side seal [1] at
the rear, push the magnet roller [2]
toward the front and then make sure
that the inner end of the side seal is
within the area [3] of the washer.
2) The bottom end of each side seal [1]
must be 0 to 0.5 mm from the corner of
the cleaner hosing; i.e., point of refer-
ence [3].
3) Attach the side seal [1] at the front and
the rear to the cleaner housing while
making sure its position is as indicated.
4-82 P
Download Free Service Manual at http://printer1.blogspot.com
COPYRIGHT © 2000 CANON INC.
[1]
F04-711-08
2000 2000 2000 2000
CANON iR5000/iR6000 REV.0 JULY 2000
[3] [2]
:0 to 0.5mm
[4]
[1]
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
