Starting The Terminal Emulation Software - Cisco Catalyst 3750 Hardware Installation Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Starting the Terminal Emulation Software
Figure D-4
1 Catalyst 3750 switches
2 Power cord
Starting the Terminal Emulation Software
Before you power on the switch, start the terminal emulation session so that you can see the output
display from the power-on self-test (POST).
The terminal-emulation software—frequently a PC application such as Hyperterminal or
ProcommPlus—makes communication between the switch and your PC or terminal possible.
Start the terminal-emulation program if you are using a PC or terminal.
Step 1
Start a terminal-emulation session.
Step 2
Configure the baud rate and character format of the PC or terminal to match these console port default
Step 3
characteristics:
•
•
•
•
•
Catalyst 3750 Switch Hardware Installation Guide
D-6
Connecting a Switch to a PC
CO NS OL
E
CO NS OL
E
CO NS OL
E
3
2
9600 baud
8 data bits
1 stop bit
No parity
None (flow control)
Appendix D
Configuring the Switch with the CLI-Based Setup Program
DC INP
UTS FOR
POW ER
REM OTE
RAT ING
SPE CIF
SUP PLY
100 -200
IED IN
1.6A -0>9
V ~
+12 v
MAN UAL
@8. 5a
A, 50-6
0 HZ
DC INP
UTS FOR
POW ER
REM OTE
RAT ING
SPE CIF
SUP PLY
100 -200
IED IN
1.6A -0>9
+12 v
MAN UAL
V ~
@8. 5a
A, 50-6
0 HZ
DC INP
UTS FOR
POW ER
REM OTE
RAT ING
SPE CIF
SUP PLY
100 -200
IED IN
+12 v
MAN UAL
1.6A -0>9
V ~
@8. 5a
A, 50-6
0 HZ
3
RJ-45-to-DB-9 adapter cable
1
OL-6336-06
Advertisement
Chapters
Table of Contents
