Table of Contents
Advertisement
10. Reinstall the retention bracket.
11. Replace the shipping thumbscrews.
12. Reinstall the memory-board assembly.
130
IBM xSeries 455 Type 8855: Hardware Maintenance Manual and Troubleshooting Guide
6. Remove the processor-board assembly from the server.
Attention:
When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling these devices,
see "Handling static-sensitive devices" on page 78.
a. Press to unlock the levers securing the processor-board assembly, and pull
up on the levers to release the processor-board assembly.
b. Slide the assembly toward the right side of the server.
c. Carefully remove the processor-board assembly from the server, and place
it on a flat, level surface.
7. Remove the power modules and microprocessor assemblies that will be
reused. See "Microprocessor and power module" on page 131.
8. Place the new processor-board assembly on a static-free, clean work surface,
and install the microprocessors and power modules that were removed in the
preceding step into the new processor board. See "Installing and replacing a
microprocessor and power module" on page 99.
9. Reinstall the processor-board assembly in the server.
Levers
Advertisement
Table of Contents
Troubleshooting
