Configuring Basic Wireless Settings - Cisco RV215W Administration Manual
Wireless-n vpn firewall
Hide thumbs
Also See for RV215W:
- Administration manual (140 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Configuring the Wireless Network
Configuring Basic Wireless Settings
Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
SSID Name
ciscosb1
Wireless
Disabled
Isolation
with SSID
WMM
Enabled
WPS
Enabled
Hardware
Button
1. When using Setup Wizard, select Best Security or Better Security to protect the device
from unauthorized access.
You can use the Basic Settings page (Wireless > Basic Settings) to configure
basic wireless settings.
To configure basic wireless settings:
Choose Wireless > Basic Settings.
In the Radio field, check Enable to turn on the wireless radio. By default there is
only one wireless network enabled, ciscosb1.
In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
B/G/N-Mixed
B Only
G Only
N Only
ciscosb2
ciscosb3
Disabled
Enabled
Enabled
Disabled
Disabled
Choose this option if you have Wireless-N,
Wireless-B, and Wireless-G devices in your
network. This is the default setting (recommended).
Choose this option if you have only Wireless-B
devices in your network.
Choose this option if you have only Wireless-G
devices in your network.
Choose this option if you have only Wireless-N
devices in your network.
ciscosb4
Disabled
Disabled
Enabled
Disabled
7
69
- Quick Links:
- Verifying the Hardware Installation
Hide quick links:
Advertisement
Table of Contents
