Configuring Bonjour; Configuring Date And Time Settings - Cisco RV215W Administration Manual
Wireless-n vpn firewall
Hide thumbs
Also See for RV215W:
- Administration manual (140 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Administering Your Router
Configuring Bonjour
Configuring Bonjour
STEP 1
STEP 2
STEP 3
STEP 4
Configuring Date and Time Settings
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Bonjour is a service advertisement and discovery protocol. On the Cisco RV215W,
Bonjour only advertises the default services configured on the device when
Bonjour is enabled.
To enable Bonjour:
Choose Administration > Bonjour.
Check Enable to enable Bonjour.
To enable Bonjour for a VLAN listed in the Bonjour Interface Control Table, check
the corresponding Enable Bonjour box.
You can enable Bonjour on specific VLANs. Enabling Bonjour on a VLAN allows
devices present on the VLAN to discover Bonjour services available on the router
(such as HTTP/HTTPS).
For example, if a VLAN is configured with an ID of 2, devices and hosts present on
VLAN 2 cannot discover Bonjour services running on the router unless Bonjour is
enabled for VLAN 2.
Click Save.
You can configure your time zone, whether or not to adjust for Daylight Saving
Time, and with which Network Time Protocol (NTP) server to synchronize the date
and time. The router then gets its date and time information from the NTP server.
To configure NTP and time settings:
Choose Administration > Time Settings. The current time is displayed.
Configure this information:
Time Zone
Select your time zone, relative to Greenwich Mean
Time (GMT).
11
134
- Quick Links:
- Verifying the Hardware Installation
Hide quick links:
Advertisement
Table of Contents
