Cisco RV215W Administration Manual page 54
Wireless-n vpn firewall
Hide thumbs
Also See for RV215W:
- Administration manual (140 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Configuring Networking
Configuring IPv6
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
To configure the device to be a DHCPv6 client:
Choose Networking > IPv6 > IPv6 WAN Configuration.
In the WAN Connection Type field, select Automatic Configuration-DHCPv6.
Click Save.
Configuring a Static IPv6 WAN Address
If your ISP assigns you a fixed address to access the WAN, configure the device to
use a static IPv6 address.
To configure a static IPv6 WAN address:
Choose Networking > IPv6 > IPv6 WAN Configuration.
From the WAN Connection Type menu, select Static IPv6.
Enter this information:
IPv6 Address
IPv6 Prefix Length
Default IPv6 Gateway
Static DNS 1
Static DNS 2
Click Save.
IPv6 address of the WAN port.
Length of the IPv6 prefix (typically defined by the
ISP). The IPv6 network (subnet) is identified by the
initial bits of the address called the prefix. All hosts
in the subnetwork have the identical prefix.
For example, in the IPv6 address
2001:0DB8:AC10:FE01:: the prefix is 2001.
IPv6 address of the default gateway. This is
typically the IP address of the server at the ISP.
IP address of the primary IPv6 DNS server.
IP address of the secondary IPv6 DNS server.
6
54
- Quick Links:
- Verifying the Hardware Installation
Hide quick links:
Advertisement
Table of Contents
