Locale Configuration Menu; Ntp Configuration Menu (Sip Phones Only) - Cisco 7931G Administration Manual
For cisco unified communications manager 8.0 (sccp and sip)
Hide thumbs
Also See for 7931G:
- Administration manual (260 pages) ,
- User manual (120 pages) ,
- Phone manual (82 pages)
Table of Contents
Advertisement
Device Configuration Menu
Locale Configuration Menu
The Locale Configuration menu displays information about the user locale and the network locale used
by the phone.
Table 4-12
Locale Configuration Menu Options
Option
Description
User Locale
User locale associated with the phone user. The user locale
identifies a set of detailed information to support users,
including language, font, date and time formatting, and
alphanumeric keyboard text information.
For more information on installing user locale, see the
Cisco Unified Communications Operating System
Administration Guide.
User Locale
Version of the user locale loaded on the phone.
Version
User Locale
Character set that the phone uses for the user locale.
Char Set
Network Locale Network locale associated with the phone user. The network
locale identifies a set of detailed information that supports the
phone in a specific location, including definitions of the tones
and cadences used by the phone.
Network Locale
Version of the network locale loaded on the phone.
Version
NTP
Provides access to the NTP Configuration Menu. For more
Configuration
information, see
(SIP phones
page
4-24.
only)
NTP Configuration Menu (SIP Phones Only)
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones.
Table 4-13
NTP Configuration Menu Options
Option
Description
NTP IP
IP address of the primary NTP server.
Address 1
NTP IP
IP address of the secondary or backup NTP
Address 2
server.
NTP Mode 1 Primary server mode. Supported modes are
Directed Broadcast and Unicast.
NTP Mode 2 Secondary server mode. Supported modes are
Directed Broadcast and Unicast.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
4-24
Table 4-12
describes the options on this menu.
NTP Configuration Menu (SIP Phones Only),
Table 4-13
describes the options on this menu.
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Display only—Cannot configure.
Display only—Cannot configure.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Display only—Cannot configure.
From Cisco Unified Communications
Manager Administration, choose System
> Phone NTP Reference.
To Change
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
OL-20798-01
Advertisement
Table of Contents
Troubleshooting
