Table of Contents
Advertisement
Chapter 5
Configuring Features, Templates, Services, and Users
Table 5-1
Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Description
Voice messaging
Enables callers to leave messages if calls are
system
unanswered.
Messages are accessed using the Message button
on the Cisco Unified IP Phone 6911.
Messages are accessed using the access code on the
Cisco Unified IP Phone 6901.
Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
•
•
You can add users to Cisco Unified Communications Manager using one of these following methods:
•
•
•
•
Managing the User Options Web Pages
From the User Options web page, users can customize and control several phone features and settings.
For detailed information about the User Options web pages, refer to Cisco Unified IP Phone 6901 and
6911 User Guide for Cisco Unified Communications Manager.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
Create a personal directory.
Set up speed dial and call forwarding numbers.
To add users individually, choose User Management > End User from Cisco Unified
Communications Manager.
For more information, go to the
Communications Manager Administration Guide.
To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
For more information, go to the
Manager Administration Guide.
To add users from your corporate LDAP directory, choose System > LDAP > LDAP System from
Cisco Unified Communications Manager.
After Enable Synchronization from the LDAP Server is enabled, you cannot add additional
Note
users from Cisco Unified Communications Manager Administration.
For more information on LDAP, go to the
Unified Communications Manager System Guide.
To add a user and phone at the same time, choose User Management > User/Phone Add from Cisco
Unified Communications Manager.
Adding Users to Cisco Unified Communications Manager
Configuration Reference
For more information refer to:
Cisco Unified Communications Manager
•
Administration Guide,
Port
Cisco Unified Communications Manager
•
System Guide,
to Cisco Unified Communications
Manager" chapter.
End User Configuration
chapter in the Cisco Unified
"Bulk Administration"
chapter in Cisco Unified Communications
"Understanding the
"Cisco Voice-Mail
Configuration" chapter.
"Voice Mail Connectivity
Directory" chapter in the Cisco
5-9
- Quick Links:
- Performing a Factory Reset
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
