R-Ewag Administration; Logging Support; Protocol Monitoring Support; Monitor Protocol - Cisco ASR 5000 Administration Manual
Enhanced wireless access gateway
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (294 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
RADIUS-based Enhanced Wireless Access Gateway Configuration
R-eWAG Administration
This section describes R-eWAG administrative procedures.
This section includes the following topics:
Logging Support
Protocol Monitoring Support
Gathering R-eWAG-related Statistics and Information
Logging Support
To view IPSG-related logs, in the Exec Mode use the following command:
logging filter active facility { ipsg | ipsgmgr } level <severity_level> [ critical-info
| no-critical-info ]
To view SGTP-related logs, in the Exec Mode use the following command:
logging filter active facility { sgsn-gtpc | sgsn-gtpu | sgtpcmgr } level
<severity_level> [ critical-info | no-critical-info ]
To view SessMgr-related logs, in the Exec Mode use the following command.
SessMgr info level log having event ID 12077 displays the mapping between WLAN IP address and MPC IP address
along with subscriber information, including Username, IMSI, MSISDN, and APN.
logging filter active facility sessmgr level <severity_level> [ critical-info | no-
critical-info ]
Protocol Monitoring Support
The system provides protocol monitor and test utilities that can are useful when troubleshooting or verifying
configurations. The information generated by these utilities can in many cases either identify the root cause of a
software or network configuration issue or, at the very least, greatly reduce the number of possibilities.
For troubleshooting purposes, the system provides a powerful protocol monitoring utility. This tool can be used to
display protocol information for a particular subscriber session or for every session being processed.
For more information on Monitor Protocol and Monitor Subscriber, refer to the System Administration Guide.
Monitor Protocol
The system's protocol monitor displays information for every session that is currently being processed. Depending on
the number of protocols monitored, and the number of sessions in progress, a significant amount of data is generated. It
is highly recommended that logging be enabled on your terminal client in order to capture all of the information that is
generated.
To view monitor protocol based logging information, in the Exec Mode use the following command:
Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide ▄
R-eWAG Administration ▀
63
Advertisement
Table of Contents
