▀ R-eWAG Configuration
You can configure a maximum of 64 eWAG/IPSG services in the system, one per context. Only one IPSG
service must be configured per context. Multiple eWAG services must not be configured in the same context as
they will not be able to differentiate between uplink and downlink packets.
Configuring the R-eWAG Service
This section describes how to configure the R-eWAG service for the following deployments:
Configuring Stand-alone R-eWAG Deployment
Configuring R-eWAG GGSN Combo Deployment
Configuring Stand-alone R-eWAG Deployment
For a stand-alone R-eWAG deployment use the following configuration:
configure
context <context_name>
ipsg-service <ipsg_service_name> mode radius-server ewag
#To associate an SGTP service:
associate sgtp-service <sgtp_service_name> [ context <sgtp_context_name> ]
#To bind the R-eWAG service to a logical AAA interface and configure the number of
subscriber sessions allowed:
bind address <ipv4/ipv6_address> [ max-subscribers <max_sessions> | port
<port_number> | source-context <source_context_name> ]
#To configure location-specific mobile network identifiers:
plmn id mcc <mcc_number> mnc <mnc_number>
#To enable APN profile for R-eWAG and optionally configure the default APN:
profile APN [ default-apn <default_apn_name> ]
#To configure QoS DSCP parameters:
ip { gnp-qos-dscp | qos-dscp } qci { { { 1 | 2 | 3 | 4 | 9 } | { 5 | 6 | 7 | 8 }
allocation-retention-priority { 1 | 2 | 3 } } { af11 | af12 | af13 | af21 | af22 | af23 |
af31 | af32 | af33 | af41 | af42 | af43 | be | ef | pt } } +
#To configure RADIUS dictionary:
radius dictionary <dictionary_name>
#To configure RADIUS accounting parameters:
radius accounting { client { <ipv4/ipv6_address> | <ipv4/ipv6_address/mask> } [
encrypted ] key <key> [ acct-onoff [ aaa-context <aaa_context_name> ] [ aaa-group
▄ Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide
50
RADIUS-based Enhanced Wireless Access Gateway Configuration