Table of Contents
Advertisement
Additional References
Router(config-pmap)# class EF-WAN
Router(config-pmap-c)# police cir 200000000
Router(config-pmap-c-police)# priority
Router(config-pmap-c)# class class-default
Router(config-pmap-c)# policy-map type service PREMIUM_SERVICE
Router(config-service-policymap)# service-policy input PREMIUM_MARK_IN
Router(config-service-policymap)# service-policy output PREMIUM_UB_OUT
Router(config-service-policymap)# policy-map type control INT
Router(config-control-policymap)# class type control always event account-logon
Router(config-control-policymap-class-control)# 1 service-policy type service name
PREMIUM_SERVICE
Router(config-control-policymap-class-control)# interface GigabitEthernet0/0/0
Router(config-if)# ip address 10.0.0.1 255.255.255.0
Router(config-if)# pppoe enable group global
Router(config-if)# service-policy type control INT
Additional References
The following sections provide references related to the MQC Support for IP sessions feature.
Related Documents
Related Topic
How to configure ISG control policies
How to configure QoS policies using the MQC
ISG commands
MIBs
MIB
No new or modified MIBs are supported by this
feature.
6
Document Title
"Configuring ISG Control
Intelligent Services Gateway Configuration Guide
Cisco IOS XE Quality of Service Solutions Configuration Guide
Cisco IOS Intelligent Services Gateway Command Reference
MIBs Link
To locate and download MIBs for selected platforms, Cisco IOS XE
releases, and feature sets, use Cisco MIB Locator found at the
following URL:
http://www.cisco.com/go/mibs
Configuring MQC Support for IP Sessions
Policies" chapter in Cisco IOS XE
Hide quick links:
Advertisement
Chapters
Table of Contents
