Table of Contents
Advertisement
How to Configure ISG Services on the Router
Command or Action
Step 4
class type control {always | map-class-name}
[event account-logon | credit-exhausted |
quota-depleted | service-start | service-stop |
session-default-service | session-service-found
| session-start | timed-policy-expiry]
Example:
Router(config-control-policymap)# class type
control always event session-start
Step 5
action-number service-policy type service {name
| unapply} policy-map-name
Example:
Router(config-control-policymap-class-control)#
1 service-policy type service service1
Verifying ISG Services
Perform this task to verify ISG service configuration.
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
show class-map type traffic
Example:
Router# show class-map type traffic
Step 3
show policy-map type service
Example:
Router# show policy-map type service
14
enable
show class-map type traffic
show policy-map type service
Purpose
Specifies a class and, optionally, an event for which actions
may be configured.
Applies the specified service policy map.
To remove the service policy map, use the unapply
•
keyword.
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Displays all traffic class maps and their matching criteria.
Displays the contents of all service policy maps.
Configuring ISG Subscriber Services
Hide quick links:
Advertisement
Chapters
Table of Contents
