Table of Contents
Advertisement
Configuration Examples for ISG Distributed Conditional Debugging
Enter Command:
Monitoring CPU Statistics: Example
The following example shows sample output for the show processes cpu monitor command:
Router> show processes cpu monitor
CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
PID Runtime(ms)
3
67
116
End = e
Enter Command:
Enabling ISG Distributed Conditional Debugging: Example
The following example shows how to filter PPP, PPPoE, and Session Manager debugs for a PPPoE
session with username "user@cisco.com". Only debugging messages for the defined user are displayed
on the console. Any other debugging messages associated with other users will not be displayed.
Router# debug condition username user@cisco.com
Condition 1 set
Router# debug ppp negotiation
Router# debug pppoe event
Router# debug subscriber session event
Displaying Debugging Conditions: Example
The following example shows how to display debugging conditions that have been set.
Router# show debug condition
Condition 1: domain cisco.com (0 flags triggered)
Condition 2: username user@cisco.com (0 flags triggered)
Condition 3: ip 172.19.200.10 (0 flags triggered)
Filtering Debug Output: Example
In the following example, the output of the debug subscriber packet detail command is filtered on the
basis of the username "cpe6_1@isp.com":
Router# debug condition username cpe6_1@isp.com
Condition 1 set
Router# show debug
Condition 1: username cpe6_1@isp.com (0 flags triggered)
Router# debug subscriber packet detail
SSS packet detail debugging is on
10
Troubleshooting ISG with Session Monitoring and Distributed Conditional Debugging
Invoked
uSecs
772
712
276
4151
604
2263
Freeze = f
5Sec
1Min
1084
0.08%
0.04%
66
0.08%
0.03%
266
0.16%
0.05%
5Min
TTY Process
0.02%
0
Exec
0.01%
0 L2TP mgmt daemon
0.01%
0 IDMGR CORE
Hide quick links:
Advertisement
Chapters
Table of Contents
