Appendix C
Catalyst 3750 Switch Show Platform Commands
show platform qos
Use the show platform qos privileged EXEC command to display platform-dependent quality of service
(QoS) information.
Syntax Description
label asic number
policer {parameters asic number |
port alloc number asic number}
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
78-16181-01
show platform qos {label asic number | policer {parameters asic number |
port alloc number asic number}} [ | {begin | exclude | include} expression]
Modification
This command was introduced.
Display QoS label maps for the specified ASIC.
(Optional) For asic number, the range is 0 to 1.
Display policer information. The keywords have these
meanings:
parameters asic number—Display parameter
•
information for the specified ASIC. The range is 0 to 1.
port alloc number asic number—Display port allocation
•
information for the specified port and ASIC. The port
allocation range is 0 to 25. The ASIC range is 0 to 1.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Catalyst 3750 Switch Command Reference
show platform qos
C-25