Cisco Catalyst 3750 Command Reference Manual page 483

Hide thumbs Also See for Catalyst 3750:

Table of Contents

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

Do not enable the root guard on interfaces that will be used by the UplinkFast feature. With UplinkFast,

the backup interfaces (in the blocked state) replace the root port in the case of a failure. However, if root

guard is also enabled, all the backup interfaces used by the UplinkFast feature are placed in the

root-inconsistent state (blocked) and prevented from reaching the forwarding state.

If you set the max-update-rate to 0, station-learning frames are not generated, so the spanning-tree

topology converges more slowly after a loss of connectivity.

This example shows how to enable UplinkFast:

Switch(config)# spanning-tree uplinkfast

You can verify your setting by entering the show spanning-tree summary privileged EXEC command.

Related Commands

show spanning-tree

spanning-tree vlan

Displays a summary of the spanning-tree interface states.

root primary

Forces this switch to be the root switch.

spanning-tree uplinkfast

Catalyst 3750 Switch Command Reference

Show Quick Links

Table of Contents