show platform acl
show platform acl
Use the show platform acl privileged EXEC command to display platform-dependent access control list
(ACL) manager information.
Syntax Description
interface interface-id
label label-number
[detail]
statistics asic-number
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 3750 Switch Command Reference
C-2
show platform acl {interface interface-id | label label-number [detail] | statistics asic-number |
vlan vlan-id} [ | {begin | exclude | include} expression]
Display per-interface ACL manager information for the specified interface.
The interface can be a physical interface or a VLAN.
Display per-label ACL manager information. The label-number range is 0 to
255. The keyword has this meaning:
detail—(Optional) Display detailed ACL manager label information.
•
Display per-ASIC ACL manager information. The asic-number is the port
ASIC number, either 0 or 1.
Display per-VLAN ACL manager information. The vlan-id range is from 1 to
4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C
Catalyst 3750 Switch Show Platform Commands
78-16181-01