Show Policy-Map - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
show policy-map
Use the show policy-map user EXEC command to display quality of service (QoS) policy maps, which
define classification criteria for incoming traffic. Policy maps can include policers that specify the
bandwidth limitations and the action to take if the limits are exceeded.
Syntax Description
policy-map-name
class class-map-name
| begin
| exclude
| include
expression
Note
Though visible in the command-line help string, the interface keyword is not supported, and the
statistics shown in the display should be ignored.
Command Modes
User EXEC
Command History
Release
12.1(11)AX
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show policy-map command:
Switch> show policy-map
Policy Map videowizard_policy2
class
set ip dscp 34
police 100000000 2000000 exceed-action drop
Policy Map mypolicy
class
set ip dscp 6
78-16181-01
show policy-map [policy-map-name [class class-map-name]] [ | {begin | exclude | include}
expression]
(Optional) Display the specified policy-map name.
(Optional) Display QoS policy actions for a individual class.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
videowizard_10-10-10-10
dscp5
Catalyst 3750 Switch Command Reference
show policy-map
2-363
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
