Port-Channel Load-Balance - Cisco Catalyst 3750 Command Reference Manual
Hide thumbs
Also See for Catalyst 3750:
- Command reference manual (1154 pages) ,
- Software configuration manual (926 pages) ,
- Hardware installation manual (231 pages)
Table of Contents
Advertisement
port-channel load-balance
port-channel load-balance
Use the port-channel load-balance global configuration command on the switch stack or on a
standalone switch to set the load-distribution method among the ports in the EtherChannel. Use the no
form of this command to return to the default setting.
Syntax Description
dst-ip
dst-mac
src-dst-ip
src-dst-mac
src-ip
src-mac
Defaults
The default is src-mac.
Command Modes
Global configuration
Command History
Release
12.1(11)AX
Usage Guidelines
For information about when to use these forwarding methods, refer to the "Configuring EtherChannels"
chapter in the software guide for this release.
Examples
This example shows how to set the load-distribution method to dst-mac:
Switch(config)# port-channel load-balance dst-mac
You can verify your setting by entering the show running-config privileged EXEC command or the
show etherchannel load-balance privileged EXEC command.
Catalyst 3750 Switch Command Reference
2-212
port-channel load-balance {dst-ip | dst-mac | src-dst-ip | src-dst-mac | src-ip | src-mac}
no port-channel load-balance
Load distribution is based on the destination host IP address.
Load distribution is based on the destination host MAC address. Packets to the same
destination are sent on the same port, but packets to different destinations are sent on
different ports in the channel.
Load distribution is based on the source and destination host IP address.
Load distribution is based on the source and destination host MAC address.
Load distribution is based on the source host IP address.
Load distribution is based on the source MAC address. Packets from different hosts use
different ports in the channel, but packets from the same host use the same port.
Modification
This command was introduced.
Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
78-16181-01
- Quick Links:
- Boot System
Hide quick links:
Advertisement
Table of Contents
