Using Eap-Tls; Using Peap (Eap-Gtc); Windows Nt Or 2000 Domain Databases Or Ldap Databases Only; Otp Databases Only - Cisco CB21AG Installation And Configuration Manual
Aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Using EAP-TLS
Using EAP-TLS
After you (or auto profile selection) select a profile that uses EAP-TLS authentication or you eject and
reinsert the client adapter, reboot the computer, or log on while this profile is selected, the EAP
authentication process begins automatically, and the client adapter should EAP authenticate.
If your client adapter authenticates, ASTU and the Link Status field on the ADU Current Status window
show Authenticated. If the authentication attempt fails, ASTU and ADU show Authentication Failed.
Using PEAP (EAP-GTC)
After you (or auto profile selection) select a profile that uses PEAP (EAP-GTC) authentication or you
eject and reinsert the client adapter, reboot the computer, or log on while this profile is selected, follow
the steps in one of the sections below to EAP authenticate. Choose the section appropriate for your user
database.
Windows NT or 2000 Domain Databases or LDAP Databases Only
The EAP authentication process begins automatically. The client adapter should EAP authenticate using
either your Windows credentials or the username and password entered in the Define PEAP (EAP-GTC)
Configuration window. If your client adapter authenticates, ASTU and the Link Status field on the ADU
Current Status window show Authenticated. If the authentication attempt fails, ASTU and ADU show
Authentication Failed.
OTP Databases Only
Use your hardware token device or SofToken program to obtain the one-time password.
Step 1
When the Token Configuration window appears (see
Step 2
Figure 6-5
Note
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
6-8
Token Configuration Window
The username is filled in automatically.
Chapter 6
Figure
6-5), enter the one-time password.
Using EAP Authentication
OL-4211-02
Advertisement
Table of Contents
Troubleshooting
