Show Connection Status - Cisco CB21AG Installation And Configuration Manual
Aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Chapter 8
Using the Aironet System Tray Utility (ASTU)
•
Simply click the desired profile to select it. A check mark appears beside the profile, and the client
adapter attempts to establish a connection using the selected profile.
Show Connection Status
When you choose this option, the Connection Status window appears (see
Figure 8-5
This window provides information on the current status of your client adapter.
element of the Connection Status window.
Note
You can also access the Connection Status window by double-clicking the ASTU icon.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Note
Login scripts are not reliable if you use auto profile selection with LEAP. If you LEAP
authenticate and achieve full network connectivity before or at the same time as you log into
the computer, the login scripts will run. However, if you LEAP authenticate and achieve full
network connectivity after you log into the computer, the login scripts will not run.
A specific profile—When you select a profile from the list of available profiles, the client adapter
attempts to establish a connection to an access point (in infrastructure mode) or another client (in
ad hoc mode) using the parameters that were configured for that profile.
If the client adapter cannot associate to the access point (or other client) or loses association while
using the selected profile, the adapter does not attempt to associate using another profile. To get it
to associate, you must select a different profile or select Use Auto Profile Selection.
Connection Status Window
Pop-Up Menu
Figure
8-5).
Table 8-3
interprets each
8-9
Advertisement
Table of Contents
Troubleshooting
