Contents Technical specifications Laundry weights Removing stains Warnings Detergents and additives Quantity of detergent to be used Disposal International wash code symbols 10 Tips for environmental protection 4 Maintenance Description of the appliance Bodywork Detergent dispenser drawer Detergent dispenser drawer Cleaning of the drainage area Water inlet filter Control panel...
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Leave the porthole door slightly ajar when the appliance is not in use. This preserves the door seal •...
Tips for environmental protection To save water, energy and to help protect the • With adequate pre-treatment, stains and limited soiling environment, we recommend that you follow these tips: can be removed; the laundry can then be washed at a lower temperature.
Control panel 1. Programme chart 5. Program selector It will help you to choose the most suitable washing To select the required program turn the control clockwise programme for your laundry. until the marker on the top coincides with the letter of the required program (reference mark on the control panel).
4. Select the option push button/s Operating sequence 5. Select the programme and start the Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine machine empty, in order to remove any manufacturing residue from the drum and tub.
Programme table Washing programmes for cotton and linen Load: 5 kg Additional DESCRIPTION Programme Temp. Fabrics functions 60° WHITES WITH PREWASH, for Prewash at 40°C example work garments, sheets, Wash at 60°C household linen, underwear, towels 4 rinses Spin 60° WHITES WITHOUT PREWASH, for Wash at 60°C example household linen, sheets,...
Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Load: 2 kg, wool 1 kg Additional DESCRIPTION Programme Temp. Fabrics functions 60° MIXED FABRICS WITH PREWASH, Prewash at 30°C for example underwear, coloured Wash at 60°C items, shirts, blouses 3 rinses Stop with water in the drum 60°...
man’s pyjamas 500 g Washing hints blouse 100 g men’s underpants 100 g Sorting the laundry Removing stains Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Stubborn stains may not be removed by just water and Sort the laundry as follows: detergent.
The detergent and any additives must be placed in the Quantity of detergent to be used appropriate compartments of the dispenser drawer The type and quantity of detergent will depend on the before starting the wash programme. type of fabric, load size, degree of soiling and hardness If using concentrated powder or liquid detergents, a of the water used.
Maintenance 1. Bodywork 3. Cleaning of the drainage area Clean the outside of the machine with warm water and a The drainage area must be cleaned if the pump has neutral, non-abrasive household detergent. Rinse with been blocked with objects such as buttons, safety pins, clean water and dry with a soft cloth.
4. The water inlet hose filter If it takes longer to fill up the washing machine it is time to check the water inlet hose filter it may be clogged. Turn off the water tap. Unscrew the fixing nut of the inlet hose. Remove the filter from the electrovalve and clean it with a hard bristle brush and replace it.
Something not working? Before contacting your local Service Force Centre, check your machine against the simple maintenance guidelines given below. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket.
Installation Transit security bars Before starting the machine up, the transport security bars must be removed as follows: You are advised to keep all the transport security bars in case the appliance has to be transported again. 1. Unscrew and remove the 4.
Hydraulic connection B) If necessary turn the hose adequately by unscrewing the nut at the There should be a COLD WATER tap near the rear of the appliance. washing machine with a screwing on connection pipe ⁄ ” gas for the water supply, a sink, a wash basin C) Now tighten the nut or a drainage system in the wall.
1,5 m. Max. IMPORTANT: The distance from the floor to the highest part of the hose should be between 60 to 90 cm. (It is advised to be between 60 and 70 cm). The hose must not be bent nor twisted to avoid clogging. Should a prolongation of the discharging hose be unavoidable this must never surpass 1.5 m and must be of the same diameter as the original hose.