Contents Warnings Washing hints Sorting the laundry Disposal Temperatures Before loading the laundry Tips for environmental protection Maximum loads Technical specifications Laundry weights Removing stains Installation Detergents and additives Unpacking Operating sequence 11-12 Positioning International wash code symbols Water inlet Washing programmes 13-14 Water drainage...
Warnings Please read these operating instructions carefully and pay particular attention to the safety notes indicated below. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance.
60 cm Depth 57 cm MAXIMUM LOAD Cotton Synthetics Delicates Woollens SPIN SPEED 800 rpm max. (FA 832) 1050 rpm max. (FA 1032) POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz TOTAL POWER ABSORBED 2200 W MINIMUM FUSE PROTECTION 10 A WATER PRESSURE...
Installation 7. Plug all the holes with the plugs which you will Unpacking find in the envelope containing the instruction booklet. All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.
The other end of the inlet hose which connects to the The drain hose must not be kinked. machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back...
Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. •...
Control panel 1 Detergent dispenser drawer 5 Mains on light This light is on whilst the machine is operating and 2 Spin speed selector dial goes out at the end of the programme. This dial has the following positions: 6 Temperature selector dial •...
Washing hints Laundry weights The following weights are indicative: Sorting the laundry bathrobe 1200 g Follow the wash code symbols on each garment napkin 100 g label and the manufacturer’s washing instructions. quilt cover 700 g Sort the laundry as follows: sheet 500 g whites, coloureds, synthetics, delicates, woollens.
Red wine: soak in water and detergent, rinse and Quantity of detergent to be used treat with acetic or citric acid, then rinse. Treat any The type and quantity of detergent will depend on residual marks with bleach. the type of fabric, load size, degree of soiling and Ink: depending on the type of ink, moisten the fabric hardness of the water used.
“0”. Close the door. Turn the dial to the required setting. FA 832 FA1032 2. Measure out the detergent 6. Select the temperature Pull out the dispenser drawer until it stops. Measure Turn the dial to the required setting.
8. At the end of the programme The machine stops automatically. The mains on light Turn the drum by hand to make sure it is completely goes out. empty, so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or If you have selected a programme which ends with their colour running into a load of whites.
Programme Temp. Fabrics functions Energy Water Duration min. 60°-90° WHITES WITH PREWASH, for FA 832 example work garments, sheets, household linen, underwear, towels FA 1032 60°-90° WHITES WITHOUT PREWASH, FA 832 for example household linen, sheets, shirts, underwear FA 1032 FA 832 40°-60°...
Consumptions* tional Programme Temp. Fabrics func- Energy Water Duration tions min. FA 832 30°-60° SYNTHETICS WITH PREWASH, for example underwear, coloured items, FA 1032 shirts, blouses 30°-60° SYNTHETICS WITHOUT FA 832 PREWASH, for example shirts, blouses, mixed fabrics FA 1032 FA 832 30°-40°...
Maintenance Bodywork Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the Clean the outside of the machine with soap and drawer after cleaning. water only. Rinse with clean water and dry with a soft cloth.
• Remove any objects from the pump impeller by Emergency emptying out rotating it. If the water is not discharged, proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; •...
Something not working? Problems which you can resolve yourself. Problem Possible cause • The door is not firmly closed. • The machine does not start up: • The machine is not plugged in or there is no power at the socket. •...
Page 18
Problem Possible cause • The machine, which is the result of modern • Water is not visible in the machine: technology, runs in a very economical way with low water consumption. Performance is nevertheless excellent. • The programme is still running. •...