Checking Wiring And Connectors; Checking Propeller; Removing Propeller - Yamaha F25 Owner's Manual
Hide thumbs
Also See for F25:
- Owner's manual (122 pages) ,
- Service manual (43 pages) ,
- User manual (25 pages)
Table of Contents
Advertisement
Maintenance
Change the oil more often when operating
G
the engine under adverse conditions such
as extended trolling.
EMU29113
Checking wiring and connectors
Check that each connector is engaged se-
G
curely.
Check that each ground lead is properly
G
secured.
EMU32112
Checking propeller
EWM01881
WARNING
You could be seriously injured if the en-
gine accidentally starts when you are
near the propeller. Before inspecting, re-
moving, or installing the propeller, place
the shift control in neutral, turn the main
switch to "
" (off) and remove the key,
and remove the clip from the engine shut-
off switch. Turn off the battery cut-off
82
switch if your boat has one.
Do not use your hand to hold the propeller
when loosening or tightening the propeller
nut. Put a wood block between the anti-cavi-
tation plate and the propeller to prevent the
propeller from turning.
Checkpoints
Check each of the propeller blades for ero-
G
sion from cavitation or ventilation, or other
damage.
Check the propeller shaft for damage.
G
Check the splines for wear or damage.
G
Check for fish line tangled around the pro-
G
peller shaft.
ZMU06562
Check the propeller shaft oil seal for dam-
G
age.
EMU30662
Removing propeller
EMU29197
Spline models
1.
Straighten the cotter pin and pull it out
ZMU01897
- Quick Links:
- Engine Oil Requirements
- Changing Engine Oil
Hide quick links:
Advertisement
Table of Contents
